CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

'85 K20 "Whitey"

Nothing much to report here for progress on Whitey. I have some stock blocks off a '08 Sierra I'm going to stick under the 4" rear blocks of the truck. They're roughly a inch and a half. With the junk out of the back these blocks should level the truck with 4 tires that have matching tread.
 
I don't want to use an add a leaf, because it doesn't need to ride any rougher than it does. I'll prob do a shackle flip like Chris's truck later on.
 
I haven't installed them yet. They're a dowled block so I honestly don't see what could be so bad. The u bolts would have them sinched together no different than the leafs and blocks it has now.
 
It would be the leafs, a 1.5", and a 4" block with heavy duty u bolts. If something shears the u bolts I'm in trouble no matter 1 or 2 blocks.
 
Meh. I hate blocks. Zero rates are okay by themselves. I know thats not what you wanted to hear.

But if it doesnt get captured with the center pin bolt going through it, I wont run it
 
Top Bottom