looks like they don't fit. I'll be glad to take them off your hands. 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
89 k5 Trazer build "The Dirty Girl" *Tubed front/taper, full hydro steer*
- Thread starter muddermilitia
- Start date
gmc4cw said:looks like they don't fit. I'll be glad to take them off your hands.
thats what the 
is for 
Well not much of an update, but I did manage to get two of the wheels welded up. And I mounted (kinda) one of the tires. It's not aired up in these pics, I just got the hardware today. Also The outer ring is not painted yet. It will be the same olive drab that I have painted my other parts.
These are procomp 16X10s with ruffstuff specialties beadlocks
These are procomp 16X10s with ruffstuff specialties beadlocks
looks good dude! ive been gone a while, ill have to go back and read up on everything you've done since i was around here back in mid july
eclipse
1/2 ton status
i'm not a big fan on how beedlocks look, but those looks sharp!!
lol you've missed a bunch!
original balzer
1/2 ton status
Lookin SWEET. Thats the exact tire I "want" to run on my crew cab. Whats the overall hight of those 42's? The 235x85x16 on my crew cab are 31.5" tall. I figure 42's should lift it 5"ish, if they are real close to 41-42". Reason I ask is so I can estimate my frame hight for Utahs lift laws.
Thanx
Balzer
Thanx
Balzer
mrdrinksalil
1/2 ton status
lookin good!
Sorry I forgot to get a measurement for you today
. But I did manage to paint one of the outer rings, bolt it up, air up the tire, and mount it on the truck 
1978Blazerk5
1/2 ton status
looks awsome i cant wait to see what it looks like with the front nounted up
mrdrinksalil
1/2 ton status
Well I finally got the correct stub shaft for the driver's side and I have the axle all assembled. I also installed the dropped pitman arm, so I need to install my XJ steering shaft and measure for a draglink. I am going to have the local 4x4 shop make me a draglink once I give them measurements.
Also I welded another wheel and mounted a swamper and put it on the truck yesterday.
Approach angle
Also I welded another wheel and mounted a swamper and put it on the truck yesterday.
Approach angle
Thanks!
Looks good!!!!
damn, i really like the bolts on the 14b you got there. take you a couple hours for all them beadlock bolts lol!
Yea it takes a long a$$ time to do those beadlocks. A hell of a lot of grinding!! For the other two wheels, we are going to weld on the rings then bring them to my brother's friend's shop. He has a lathe and will just put the wheel in the lathe and quickly machine em flat for us.
