looks good man!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
89 k5 Trazer build "The Dirty Girl" *Tubed front/taper, full hydro steer*
- Thread starter muddermilitia
- Start date
Big91RustyBucket
1/2 ton status
You done yet.... ?
Are you?
NEK5
3/4 ton status
x2! How`s the s-dime doin?Are you?
Big91RustyBucket
1/2 ton status
Not bad saving some coin. Need to order some Coilovers , plasma , and bender.
Have the cash just don't like to spend it.
bah! stop muckin up my thread
Something will be done to the truck this weekend, not sure yet but something will be done. Oh and one of the tires went flat the other day, I have no idea how that happened but I aired it back up and I can't hear any leaks
Big91RustyBucket
1/2 ton status
bah! stop muckin up my thread
Something will be done to the truck this weekend, not sure yet but something will be done. Oh and one of the tires went flat the other day, I have no idea how that happened but I aired it back up and I can't hear any leaks
Oh , and Tires just go flat on their own?>......
Off to bed. Flight leaves for vegas , in 5 hrs.
well they mustOh , and Tires just go flat on their own?>......
Off to bed. Flight leaves for vegas , in 5 hrs.
It was the 1st one I mounted so its been aired up for over two months and then in less then a week it goes from looking fine to being down on the rim 
Oh and have fun in vegas, don't pick up any hookers with adam's apples
Big91RustyBucket
1/2 ton status
well they must
Oh and have fun in vegas, don't pick up any hookers with adam's apples
Unless the hookers come with pimp 4x4 parts I think I will pass.
Some of my parts from Northwest Fabworks arrived the other day:
We took the truck out for a much needed garage cleanup and started on the lower shock mounts for the front.
And here you can see my friend tyler practicing his driveway wheeling skills and my friend alex acting like a jacka$$
We took the truck out for a much needed garage cleanup and started on the lower shock mounts for the front.
And here you can see my friend tyler practicing his driveway wheeling skills and my friend alex acting like a jacka$$
looks good man
original balzer
1/2 ton status
Is there glass as well as the expanded metal in the back window?
No glass, only the wire mesh
original balzer
1/2 ton status
Do you have plans for a bed or are you going to more of a cage? I just remember riding my BMX as a kid and gettin mud in my hair when I went through puddles. If you going less bed and more cage some semi 1/4 fenders would keep mud/water off the back of your mellon. A little expencive but cool none the less. Even the plastic ones would be cool.
http://www.iowa80.com/iowa80/shop?method=category&catid=QTR-FENDER&page=2
http://www.iowa80.com/iowa80/shop?method=category&catid=QTR-FENDER&page=2
reddog64
1/2 ton status
finally got the parts huh... look good!
I do plan on a flatbed with raised sides. That rectangular structure on the frame is the start of the bed. This is kind of what im going for
That's the flatbed kit for toyotas from All pro offroad. Hopefully this will stop some of the mud from coming into the cab
.This is from my last wheeling trip:
It was a good thing I had the hood of my sweatshirt over my head, because after the first mud hole the back of my head was covered in mud
Yea, but im still waiting for two bearings for the 203 range box and the new billet intermediate shaft
original balzer
1/2 ton status
That will be sweet! I have to build a bed for my crew cab too as it will only be 4 ft long. I have a few ideas but wish I knew how to do the 3d modeling stuff on puter.
Yea I have seen countless flatbeds on the internet, looking for ideas. There's a flatbed thread on pirate 4x4 in the toyota section. I'm sure you will get some ideas from there. This bed is 6ft. long also I forgot to mention there will be a box mounted on each side of the flatbed in front of the tires. One will hold two batterys, the other will be for storage. And eventually I'd like to mount another seat in the back up against the cab facing rearwards
original balzer
1/2 ton status
mother-in-law seat? sounds like it would be a hell of a ride there
