CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

89 k5 Trazer build "The Dirty Girl" *Tubed front/taper, full hydro steer*

do you think you could do me a favor and tell me how high from the ground to the center of the frame is?
Ok its 27-3/4"s at the center of the frame
weird the rear mounts on my cab look nothing like that crossmember theyre just like pieces that stick out and the bushing sits on top of it followed by the cab its a 1982 3/4 ton so idk what the difference is and its going on an 82 blazer frame how much does the cab have to be lifted on the blazer frame in order for the front clip to line up right
It's about 6-3/4"s from the frame to the bottom of the cab where the xmember bolts up to. If you made it so it was 7"s that would probably be perfect.
 
Ok its 27-3/4"s at the center of the frame

It's about 6-3/4"s from the frame to the bottom of the cab where the xmember bolts up to. If you made it so it was 7"s that would probably be perfect.

alright thanks a ton and also how many guys did you have to get to move the pickup cab on the blazer frame im almost ready to do it and i need to know how many people to round up
 
alright thanks a ton and also how many guys did you have to get to move the pickup cab on the blazer frame im almost ready to do it and i need to know how many people to round up
4

S6300020.jpg
 
well i got the cab off today but was rudely interrupted by code enforcement they said a neighbor complained and that i had to have all non running cars any parts and my boat gone within thirty days! why cant people get lives:confused:
 
well i got the cab off today but was rudely interrupted by code enforcement they said a neighbor complained and that i had to have all non running cars any parts and my boat gone within thirty days! why cant people get lives:confused:
Damn that sucks!
 
well i got the cab off today but was rudely interrupted by code enforcement they said a neighbor complained and that i had to have all non running cars any parts and my boat gone within thirty days! why cant people get lives:confused:

Sounds like my prick neighbors. No wrenching in the driveway ( I am always in garage anyways)

No trailers in Driveway..

Gotten warnings for parking across sidewalk etc etc... ****ing no good idiots have nothing better to do. Normal night wreching session isn't normal for me unless cops show at least 1 time :)
 
Sounds like my prick neighbors. No wrenching in the driveway ( I am always in garage anyways)

No trailers in Driveway..

Gotten warnings for parking across sidewalk etc etc... ****ing no good idiots have nothing better to do. Normal night wreching session isn't normal for me unless cops show at least 1 time :)

Yeah, my neighbors tend to dislike the sound of impact wrenches at midnight. I can't figure out why:confused: It's not like its really loud and annoying:haha:
 
My neigbors complained about me parking my running, licensed truck on the street. So the cop that got sent out suggested that I park it in the driveway across the sidewalk behind another car. No more complaints. :dunno:

I think the pile of junk parts in my driveway will attract attention before too long though. :(
 
how much of a lift would you say the 52's and 64's actually gave you because i can get my 64's for 20 each tomorrow but i dont really see the point if it wont give me any lift
 
how much of a lift would you say the 52's and 64's actually gave you because i can get my 64's for 20 each tomorrow but i dont really see the point if it wont give me any lift
I estimated that my truck has about 5 inches of lift. Almost brand new 52's in the front. When I 1st swapped in the 64's I lost some lift. The spring pack was only 2 leaf + overload so I added a leaf and I added a zero-rate. Now the rear matches the front pretty close.
 
I estimated that my truck has about 5 inches of lift. Almost brand new 52's in the front. When I 1st swapped in the 64's I lost some lift. The spring pack was only 2 leaf + overload so I added a leaf and I added a zero-rate. Now the rear matches the front pretty close.
so would a 5 leaf 64 give me a lil bit of lift or are they mainly for flex
 

Latest Posts

Top Bottom