What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Abandoning Project: LOTS of items

Sorry for the delay, I've been out of town for a while. I'm going out to get pictures of everything right now and I'll answer the new questions.
 
Here are the two yokes I have. I know one is for the 205 rear output and the other for the 14b FF... I don't remember which one is which though. They both have the U-bolts and hardware in their boxes.

One set of springs are still new in the shipping plastic. I took pictures of the other set that I installed to put the 14bFF axle in place and mock up the shackle flip.

1410 yoke 1.jpg

1410 yoke 2.jpg

Springs - New.jpg

Springs - Mock 1.jpg

Spring - Mock 2.jpg
 
Here is a picture of the steering/x-over arms I have. They're not reamed for TRE's.

Here's a shot of the DOM tubing... tubing is tubing though.

I took a couple shots of the DIY4X shackle flip I modified. Originally a Gen1 kit it was widened to fit the Gen2 trucks.

Lastly, there's the spring hangars from RuffStuff... I have two pair of them.

D60 Arms.jpg

DOM tubing.jpg

Shackle Flip 1.jpg

Shackle Flip 2.jpg

spring hangar.jpg
 
Two of the hawgs have pretty decent tread and the other two leave some to be desired.

Here are two shots of the set of heims that I have.

Hawgs 1.jpg

Hawgs 2.jpg

Heims 1.jpg

Heims 2.jpg
 
- Edelbrock 750 CFM carb (#1407) like new condition

is it still available?? does the square bore converter come with it??
 
neverendingproject said:
Ill take a piece of tubing then. Just let me know the final price.
Click to expand...
What's your zip and I'll figure a quote.

1979jimmy350 said:
intrested in the hydro parts do you have a peddle and such to go with them?
Click to expand...
No peddle for it, I'll get pictures of what all I have.

yunit said:
$150 - 3/4" heim joints (3 LH & 3 RH w/ jam nuts), x4 3/4" bolts 3" long w/ 2 washers and 1 nut each, 4 threaded inserts for 1" ID tubing (2LH & 2RH) and 4x misalignment spacers

What make are these?

I won't ask for a shipping quote since all of this stuff will fit in a USPS $8.95 flat rate box.

Thanks,
Pete.
Click to expand...
I'm not sure what kind these are. Pictures are now included if that helps at all.

CUCV2 said:
$300ea - 2 sets of 56" springs w/ 4" lift - one set new, one set used to mock up
$75 - 1410 yoke for 14bFF (#1749?)

What brand lift springs and Yoke? Thanks.
Click to expand...
The yokes are from ShakerBuilt, but they appear to just be Spicer units. I'll get the numbers off the springs for you to decode.

aknight_sa said:
- Edelbrock 750 CFM carb (#1407) like new condition

is it still available?? does the square bore converter come with it??
Click to expand...
I'll get pictures of what all is included. I don't think it has the converter on it.

johnnychimpo said:
Spring plates for sale? How much shipped to 37172?
Click to expand...
Sure, I had forgot about the plates. Make an offer?
 
Here is the hydro clutch parts I have.

All of the hydro-assist parts in the box yet.

Two shots of the Edelbrock carb I have for sale.

Hydro 1.jpg

Hydro 2.jpg

Assist.jpg

Edelbrock 1.jpg

Edelbrock 2.jpg
 
$75 - factory 52" springs w/ Energy Suspension bushings and painted

Can you get me a picture on these? I think we could work something out for them. Also shipping cost to 84074.
 
BUMP

Several items have shipped out and don't have any complaints so far. A deal on the carb is pending.

Is ANYONE interested in the axles? I'm willing to make a deal on them so I can sell them. I may be able to ship, we'll discuss that if you're interested.
 
You must log in or register to reply here.

Latest Posts

Top Bottom