CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
And it continues build thread. Dead.. sent to the scrapyard
- Thread starter jekquistk5
- Start date
Started sheet metal work. I hate it with a passion. It doesn't look good at all but its functional and no one will get cut if they happen to have their hand up by the pillar.
don't ya love all those spot welds Jess?
I know what ya mean with metal work....I don't mind it, but it takes me forever to get good results....a good body man can nail it first time, me....I put it together, mud it, sand it, mud it again, sand it, mud, sand, mud, sand....etc...
I know what ya mean with metal work....I don't mind it, but it takes me forever to get good results....a good body man can nail it first time, me....I put it together, mud it, sand it, mud it again, sand it, mud, sand, mud, sand....etc...
Looks like it'll work Jess, wide open too! And why is it that the camera angle makes your dual toolboxes look like they are 3 ft tall? 
Looks like it'll work Jess, wide open too! And why is it that the camera angle makes your dual toolboxes look like they are 3 ft tall?
Yah they kinda do. Its because I have my truck on the trailer to make it easier to make it easier to move around.
You can see my where I messed up but I fixed it with a 1" blockYup I pulled an eric
I have no idea what you are talking about.
I kind of like the whole partial cab thing but you are gonna cut it off eventually I know you will!
I would still like to do some mud in my truck my I do need to figure out a way to keep the mud from hitting me in the back of the head
That explains a lot, I was wondering why the rig looked so high, plus then it makes what, double easier to move around!
I have no idea what you are talking about.
I kind of like the whole partial cab thing but you are gonna cut it off eventually I know you will!
I would still like to do some mud in my truck my I do need to figure out a way to keep the mud from hitting me in the back of the head
Yah I will cut it off eventually. I'm trying to make the cage so that I will have protection if I put another seat in. (this is after I cut the bulkhead) But since there is nothing going to be there other than a gas tank and a spare tire I'm at a loss.
Eric I was looking through the horton pics. What are you doing for a gas filler? I can't quite see it in the pics. I was gonna put a fuel cell in but, I have the blazer tank and everything to make it work. Since I am paying for my own wedding I have to cut the truck budget a little.
It just has a the normal hose just kind of stuck in there with the vent blocked off, kind of a pain to fill but not too bad. I was going to use a fuel cell too, but already had the blazer tank, factory fuel pump etc. It has been good too, I don't think I will do anything with it till I can make my own fuel cell that used the factory fuel pump
I will go take some pics Jess
Done with cab sheet metal. Its not perfect in any way but I'm happy with it.
I'm getting pretty darn good with the bender. Need to pick up a hole saw to make copeing a little easier.. I suck at that. But anyways got a good chunk of the main cage done today.
I am upset with myself for cracking my perfect windshield though. I guess its one step closer to truggy. I did it while taking the tube out I didn't rotate the tube perfect and it hit the window. Oh well its on the passenger side
I am upset with myself for cracking my perfect windshield though. I guess its one step closer to truggy. I did it while taking the tube out I didn't rotate the tube perfect and it hit the window. Oh well its on the passenger side
Full tube full tube full tube full tube. Heres the pics of where my filler neck is Jess.
Pretty non creative and it takes a while to fill the tank and I doubt I will ever change it until I build a fuel cell
That is the factory blazer hose and stuff didn't even cut it down just took it out of where it was and used it
Pretty non creative and it takes a while to fill the tank and I doubt I will ever change it until I build a fuel cell
That is the factory blazer hose and stuff didn't even cut it down just took it out of where it was and used it
It's lookin' good, I like the way it's tucked up real tight to the body (what's left of it). And it'll be cool to have it wide open when wheelin, as long as it's not raining.
Fair weather wheeler
Thats what me and my son love about his truck, we'll just go out and cruise with the top off BECAUSE its raining Though mud n sand may be a little different
Fair weather wheeler
Actually when it rains on the sand it makes it easier because the sand becomes heavier and you get more traction.
Actually when it rains on the sand it makes it easier because the sand becomes heavier and you get more traction.
And ten times bumpier
Latest Posts
-
-
-
-
Chevy Dump Bed - PTO from TH400/NP205, Other specs coming in- Latest: 83ChevyK5Blazer
-
