I was thinking restaurants but maybe that’s just cause I’m hungry at the moment
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
BB2020 yard sale
- Thread starter Bent77
- Start date
Last edited:
I have a pair of rear springs out of an early 2000s 1/2 ton. $75
Driveshafts and yokes;
One shaft is a heavy wall extended slip, off road only. It isn't balanced. It has a 32 spline yoke with it. 35.25" collapsed, extends to 53.25 C-C on the joints. $200 OBO.
Next is a CV style, 1350 CV and yoke end. Has a D60 standard depth yoke with it. 33.5" collapsed, has 3.5" of slip travel. Probably not balanced anymore, I pulled it apart on an obstacle. $80
And the short one is 1310, has a standard D60 yoke with it, 25.5" collapsed, 30" extended C-C on the joints. Complete with rock rash, $20.
Not planning on hauling any of this to Moab unless someone wants to make a deal.
Driveshafts and yokes;
One shaft is a heavy wall extended slip, off road only. It isn't balanced. It has a 32 spline yoke with it. 35.25" collapsed, extends to 53.25 C-C on the joints. $200 OBO.
Next is a CV style, 1350 CV and yoke end. Has a D60 standard depth yoke with it. 33.5" collapsed, has 3.5" of slip travel. Probably not balanced anymore, I pulled it apart on an obstacle. $80
And the short one is 1310, has a standard D60 yoke with it, 25.5" collapsed, 30" extended C-C on the joints. Complete with rock rash, $20.
Not planning on hauling any of this to Moab unless someone wants to make a deal.
Moving stuff around I found a 700R4 deep aluminum pan with gasket, bolts, and drain plug. Adds an extra quart capacity.
Also have an Edelbrock 73828 liquid filled fuel pressure gauge.
$50 for each.
Also have an Edelbrock 73828 liquid filled fuel pressure gauge.
$50 for each.
I just bought a new left one because you did not give me one last year.
You never offered. I figured there was an "old man hoarding" thing going on.
If so you would not have needed to buy one
NorthWest Fabworks doubler for sale, all ready to go. I have room to haul it to Blazer Bash. Passenger drop, was bolted to a TH400. Both cases have been cleaned and rebuild kits installed. No shifters. Asking $1,000.
View attachment 352544
View attachment 352544
Hell yeah thanks man
Anyone have a good 4l60 near moab? Someone just blew theirs 
I didn't know @Babaganoosh went to BB this year. (somebody had to do it)Anyone have a good 4l60 near moab? Someone just blew theirs
That sucks big time.
If we can all put feelers out looking for one he would love to swap and make it on the trails
Maybe @Truckman4life has a local contact. I thought there was Chevy guy around
What about the guy that has the Extreme Off Road Tours with the suburbans? Or the dude with the Chevy off road wrecker?
There's a couple salvage yards in Richfield. Not sure if I would trust a trans from a yard though.
