DO IT. Or are you CHICKEN?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Blazer Bash 2021 not Last Minute Thrash
- Thread starter 500$k5
- Start date
My little 37s fit mine.
I just need to get my tune figured out better. And find out if my on-board air conglomeration works.
Stop and pose for some pics, and I’ll just be shooting for BB2022.
doing it. No cluck cluck here!
It’s a bigger jump to the 40’s than initially realized.My little 37s fit mine.
I can relate!
I've got some parts slowly coming in. Who can guess what I might be up to? 
I don't have a lot of stuff to do...
Cap the ends and stuff it in there.
Whats funny is most of it is going to have to, I bought a harness with so many extra items that my bare bones truck doesn't need yet.
Mine starts. It doesn’t move.
David
David
Mission critical items:
Fix minor cracks in frame at steering box. Weld in brace kit.
Install xj steering shaft while the box is out.
Pass side exhaust manifold gasket is leaking.
I should probably recheck the winch functionality and respool the cable.
Non-misson critical items:
Swap core support for correct version so I can install the headlight bezels. Might do this with the frame repair. Just depends.
My free weekends I'm spending in Denver helping my Dad and visiting my Mom in the nursing home. So I'll probably be getting most what I need done on Sundays when I work on Saturday.
Fix minor cracks in frame at steering box. Weld in brace kit.
Install xj steering shaft while the box is out.
Pass side exhaust manifold gasket is leaking.
I should probably recheck the winch functionality and respool the cable.
Non-misson critical items:
Swap core support for correct version so I can install the headlight bezels. Might do this with the frame repair. Just depends.
My free weekends I'm spending in Denver helping my Dad and visiting my Mom in the nursing home. So I'll probably be getting most what I need done on Sundays when I work on Saturday.
Well I just trimmed the fenders for the 3rd time to get the 37's to clear...You gonna join the differential plow club? Or get some 40’s?
Isn’t that fun? I finally cut my fronts back to the inner wheel well and welded the lip back on
- Joined
- Mar 3, 2000
- Posts
- 9,124
- Reaction score
- 7,078
Ok I am in, just booked a camping cabin at moab rim. Now to get to work on the rig!
Hook the red one to the battery, and the purple one to the starter. DONE. Off to Moab!
Yes! The truck runs and drives with the wires like that!
I always over prep and on the drive up to Moab I run everything through my head. I try my best not to be that guy with a broken rig.
Wait, your not supposed to bring a shit box out to get it finished by all the skilled builders on run with you. Dam that's harsh
Who doesn't like working on trucks with a view of awesome scenery.
Me. I hate it. Only good thing about it is the heckling.
