CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Blazer is really done. Last pictures while she is still mine.
- Thread starter cybrfire
- Start date
- Joined
- Mar 3, 2000
- Posts
- 9,128
- Reaction score
- 7,093
Nah, but she sure did talk dirty.
and she got hot and wet.
Back on target, had a vibration at highway speed last go round and traced it back to the front pinion. Now that the driveshafts are out, I found some up/down play in the front pinion so I'll have to dig into that and see what's up.
Nope, not a drop. It's a very, very slight movemet.
not like, say a wheel bearing then...
Nah, nothing like that.
mrdrinksalil
1/2 ton status
Forgive me for not searching but how is your doubler supported? And who's doubler kit? I have a older version NWF kit and and sure dont want me bolts backing out like everyone else.
Can't remember who built my doubler. It's an all steel one.
It's supported by a crossmember at the doubler adapter and another in front of the 203. All my drivetrain is solid mounted. I mention it as it could be a factor, however, before the big rebuild it was solid mounted as well and never came loose.
Didn't manage to get it reinstalled tonight. Got the studs put in the 205 and loctited. Decided to let that sit for 24 hours before continuing. Made up a gasket. Maybe tomorrow. No real hurry since i'm waiting for a couple of items.
mrdrinksalil
1/2 ton status
From what I've heard from those who have had the same issue they say you really need to support the back of the 205 in some way.
Thought about that. Undecided, but I could see the extra support helping.
mrdrinksalil
1/2 ton status
PM sent
Tcase is back in, really could feel the locking effect of the hardware grabbing when the studs got smoked down.
Got to rework the crossmember yet and look into the possibility of the rear support.
Got to rework the crossmember yet and look into the possibility of the rear support.
Fitting for my radiator showed up yesterday or friday, don't know which. Now I can finish up my radiaor hoses.
Tcase crossmember is a done deal.
Got a solid start on putting some tube doors on.
Tcase crossmember is a done deal.
Got a solid start on putting some tube doors on.
Latest Posts
-
-
'99 4 Door Tahoe SAS Build, Taking it back a few years- Latest: ktmoutfront
-
-
