CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Blazerbash ‘22 yard sale
- Thread starter Bent77
- Start date
I have a rear bumper with a tire carrier off my first gen blazer. It was custom made, mostly 1/4" plate. Has a receiver hitch. It would need some cleaning up and a new plate made to hold the spare with whatever bolt pattern your wheel is. It got fairly rusty sitting in my back yard for years but it is still plenty solid. Not sure if it would fit any other years. It would depend on the frame width if it was the same as the first gen. I would take $50 for it and will haul it to Blazer Bash. Would like to see someone get some use out of it rather than rusting away in my yard.
- Joined
- Apr 23, 2016
- Posts
- 2,937
- Reaction score
- 5,013
https://ck5.com/forums/threads/tom-woods-cv-drive-shaft-almost-new.346198/
Make an offer I'm moving and want it gone. Changed the price to $200 plus shipping for a Wood's CV shaft 1310 joints. Other info in the link.
Make an offer I'm moving and want it gone. Changed the price to $200 plus shipping for a Wood's CV shaft 1310 joints. Other info in the link.
Last edited:
where are you moving?
FWP
CRS
Not new "tight" by any means, but not sloppy either. I maintained it regularly, it is a grease slingin pig
FWP
CRS
Pickups on the bottom, in the corners, tied together then fed to the supply fitting on the tank. Check valves internal on the pickups, fuel supply at any angle as long as there's 5 gallons in the tank. Unless of course, you're upside down
I ran that tank in my old tube buggy.
I’ll take itPickups on the bottom, in the corners, tied together then fed to the supply fitting on the tank. Check valves internal on the pickups, fuel supply at any angle as long as there's 5 gallons in the tank. Unless of course, you're upside down
FWP
CRS
It's yours. I'll be at Moab Rim Campark, cabin 56 Tuesday afternoon until Monday
FWP
CRS
This one, it's got a ford taurus fan on the other side. I ran into a tree branch, poking a hole in it in Farmington. Took it to big industrial shop in town, and was back on trail the next day
FWP
CRS
Done.
Cut up wheel wells, maybe you want to cut your good ones? Use these instead. Free if someone speaks up now. Going in trash after BB. Can’t find my picture of them, kinda see in this poser pic. Cut for the shocks and along the cab.
12,000 lb steel winch line off my Warn. Good line, probably won’t go back and can’t store it if I did. Buy me a burger & fries from the Brewery.
12,000 lb steel winch line off my Warn. Good line, probably won’t go back and can’t store it if I did. Buy me a burger & fries from the Brewery.
- Joined
- Apr 23, 2016
- Posts
- 2,937
- Reaction score
- 5,013
https://ck5.com/forums/threads/tuff-country-shocks-61301-qty-2.346200/
Changing price to $60 if they go to a member at Blazer bash. Otherwise it's $60 plus the shipping.
Tuff Country Shocks for 2-2.5 inch lift. Only 2 rear shocks, new in box.
Changing price to $60 if they go to a member at Blazer bash. Otherwise it's $60 plus the shipping.
Tuff Country Shocks for 2-2.5 inch lift. Only 2 rear shocks, new in box.
- Joined
- Apr 23, 2016
- Posts
- 2,937
- Reaction score
- 5,013
Here's another Blazer Bash special. I do not want to haul all my parts around anymore. Get a great deal on an OEM TH350 to NP205 adapter. No cracks ready to roll.
https://ck5.com/forums/threads/oemth350-to-np205-adapter.346199/
https://ck5.com/forums/threads/oemth350-to-np205-adapter.346199/
Just light surface rust
Heck you can throw those on marketplace and ask $1000, just say typical rust for the year!
Wish I hadn’t cut them. Had no rust when I got the truck and zero battery damage 
Got some speaker boxes also, free if someone speaks up. 5.5” and 6x9” not sure how well the speakers are but the boxes fit nice. Hurculiner on the outside, 3/4 MDF.
Got some speaker boxes also, free if someone speaks up. 5.5” and 6x9” not sure how well the speakers are but the boxes fit nice. Hurculiner on the outside, 3/4 MDF.
