Looking good man. Can't wait to see the first burnout pic 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Deulings 1985 K5 Blazer, --aka Borderline Obnoxious; Silver Lake pics and Vids
- Thread starter Deuling
- Start date
Yup so im headin out in the mornin to pick it up, hopefully the makeshift stand survives the 1.5 hour drive back from MP. It seems sturdy and yes dave ill put it up front in case of a breaking emergency, hopefully he just doesnt peg the old F250 to hard and make it slide back
I went to the atm, I owe him 875, but the stupid thing would only let me take out 500, hopefully I can find a PNC on the road somewhere, only open 9-12 on sat, and I think that because I just took the money out and its after 4 its technically saturday for the bank so I doubt Ill be able to use the atm tomorrow
I went to the atm, I owe him 875, but the stupid thing would only let me take out 500, hopefully I can find a PNC on the road somewhere, only open 9-12 on sat, and I think that because I just took the money out and its after 4 its technically saturday for the bank so I doubt Ill be able to use the atm tomorrow
Yup so im headin out in the mornin to pick it up, hopefully the makeshift stand survives the 1.5 hour drive back from MP. It seems sturdy and yes dave ill put it up front in case of a breaking emergency, hopefully he just doesnt peg the old F250 to hard and make it slide back
I went to the atm, I owe him 875, but the stupid thing would only let me take out 500, hopefully I can find a PNC on the road somewhere, only open 9-12 on sat, and I think that because I just took the money out and its after 4 its technically saturday for the bank so I doubt Ill be able to use the atm tomorrow
Yeah, max amount allowable to be withdrawed through an ATM is 500. I was going to pay my rent and found this out and had to go inside. You should be able to go in the bank and fill out a withdrawal ticket and get the cash
Well the problem was it was after 6 so the bank was closed, and tomorrow the bank is only open from 9-12 and Im leaving here at 7 am to go get it lol. But I found out if you go to another banks atm and pay the 3 dollar charge you can take out as much as you want
I now have 900 in 20s stuffed in my ninja turtles wallet, No it does not come even close to closing lol
Edit: Are you guys as excited as I am about getting my new motor tomorrow!!!??? If you say no I no longer like you...
I now have 900 in 20s stuffed in my ninja turtles wallet, No it does not come even close to closing lolEdit: Are you guys as excited as I am about getting my new motor tomorrow!!!??? If you say no I no longer like you...
Last edited:
I'm all boner 
made it difficult when I put my own engine in
made it difficult when I put my own engine in
I'm all boner
made it difficult when I put my own engine in
Well this is just bonerific!!!
I realize im a pic whore, GET OVER IT!!!
He mentioned something about ARP studs or something, It sounds good
Last edited:
Poor poor little 10 bolt
Ahhh
Soon enough their will be something bigger, let me just focus on one thing at a time lol. I have been sandblasting literally everything lol, I was blasting the flywheel when I thought WTF nobody will ever see this!!! (I kept doing it... I think I have a problem
)
With the little tires he is running, and an open axle, the ten bolt could last a long time.
Martin
Martin
Ahhh
Soon enough their will be something bigger, let me just focus on one thing at a time lol. I have been sandblasting literally everything lol, I was blasting the flywheel when I thought WTF nobody will ever see this!!! (I kept doing it... I think I have a problem
I am the same way sometimes, so I understand. That being said, it is a flexplate, not a flywheel. Most people call them a flywheel, but with an automatic transmission, it is technically a flexplate, not a flywheel. Manual transmissions use a flywheel.
Martin
Oh yes you are correct lol, I think that sand is affecting my brain lol.
SilverduneJimmy
1/2 ton status
OMG!!!! That engine looks bad azzzz!!! I dont know how you do it, you work so fast and get so much done. Wait I know. Ur not married and dont have any kids. O to be young again, LOL. Finally got my Jimmy home today a month and a half after buying it. Its hard not to start tearing stuff apart with out some sort of a plan.
magik235
Still Alive
Excellent engine.
Lol you are correct on that one. No wife, no kids, but I do have my lady who is just nuts about me and always wants to hang out (cant argue with that
) I have my normal job, then im always up at gpas helping with the excavating business he does by himself, and when im not fixing my: Dads/Moms/Grandparents/Brothers/Girlfriends stuff, I get to work on my stuff... I guess you could say im a pretty busy guy lol. I dont think ive slept in past 8 oclock on a weekend in the past, well I cant remember lol.I figure I can keep up with all this stuff while im young, then im sure Ill need to cut back eventually, but right now its GRAB ANOTHER 20oz RED BULL AND GET SOME SH*T DONE!!!!
Thanks man!!! I was gonna snag the cam info sheet he gave me but I forgot, ill throw the specs up tomorrow, nothin big, he said it will prolly stop producing and more power around 5400 rpms... (Ive never revved an engine past 4 though so i dont think ill have a problem with that lol.)
Lol you are correct on that one. No wife, no kids, but I do have my lady who is just nuts about me and always wants to hang out (cant argue with that
I figure I can keep up with all this stuff while im young, then im sure Ill need to cut back eventually, but right now its GRAB ANOTHER 20oz RED BULL AND GET SOME SH*T DONE!!!!
I hear yah!!! Sleeping in is lame, I was upset I had to wait till 8AM yesterday to go to hardware store to get a hole saw!!!
I hear yah!!! Sleeping in is lame, I was upset I had to wait till 8AM yesterday to go to hardware store to get a hole saw!!!
Oh yah!!! I was pissed cuz the bank doesnt open untill 9am on saturdays so I had to pull $900 in 20s out of the atm because I left to get it at 8 lol.
Oh and BTW guys those valve covers... They No Fit
. I need some taller ones to get over the rockers. Im lookin for some alluminum ones that wont break the bank. I found a couple bowtie ones, I want silver of course, but havnt found a set I like for under $100.
if you really want to use those for the look, they sell spacers so you can space the covers up some. Never used them so can't vouch...
Reheheally??? I will have to look into those then, I imagine you need another set of gaskets as well?
