Exhaust ideas

[ZombieK5]

I have purge welded.
You don't need it for a exhaust.
Nor will you probably be able to find anyone to do it for you unless your willing to go to a super high end shop and pay major bucks

Can you weld? I'd build the system yourself if you can.
Pretty tough to find any shop that's able to do 3 inch stuff.
I did 3 inch on my chevelle in stainless. No one would touch it. So I just did it myself. Bought all the pipe online and welded it up myself.

I'm sure I could weld it... Just don't have a machine to bend the 3" tubes

 

[ZombieK5]

I have purge welded.
You don't need it for a exhaust.
Nor will you probably be able to find anyone to do it for you unless your willing to go to a super high end shop and pay major bucks

Can you weld? I'd build the system yourself if you can.
Pretty tough to find any shop that's able to do 3 inch stuff.
I did 3 inch on my chevelle in stainless. No one would touch it. So I just did it myself. Bought all the pipe online and welded it up myself.

Wondering if this kit has enough to do the entire exhaust... Thoughts?

 

[JDJ2810]

Wondering if this kit has enough to do the entire exhaust... Thoughts?

Yes. It's what I started with, and it provides plenty of material for a true dual setup all the way out the back on the Blazer. I dumped mine right after the mufflers and it is rowdy, the neighbors hate it, and my wife says it's too loud. I plan to run the tailpipes soon. It's going to be that or a dual into single exit similar to the one in this thread.

 

[beags86]

I'm sure I could weld it... Just don't have a machine to bend the 3" tubes

Just buy the bends. Weld together.
I'm sure that kit pictured would get you started pretty well.

 

[Blue85]

I did it for my Buick. You can mock-up the routing with something flexible like soft copper tubing and then copy it. You can't make the expanded slip joints with a cheap tubing expander. I had to carry my pieces down to a muffler shop and they expanded the whole box on their giant hydraulic machine for $20 in about 5 minutes.