CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Got any cool tools lately?
- Thread starter nvrenuf
- Start date
I have had bearings and I had bronze bushings.Awesome. I didn't even realize there were bearings in there
Bearings are smoother but when they go out they could destroy the snout
So what's the discount exactly?
30%
Joined the band on the spindle bearing tool.
I guess I’ll retire the triple bend screwdriver.
I guess I’ll retire the triple bend screwdriver.
That bent screwdriver works pretty fast.
Yup that A78 is sexy for sure but that electrical tape dispenser still has me in awe, next on my FeeBay list !
I upgraded.
couple more M12's that I "needed" for a job. Right angle impact & Rotary
I scored these metal cabinets that were removed from a bank remodel about 10 years ago.
It's 8 individual cabinets 20" wide, 21" deep and 38" tall with leveling feet. I found a wire and what appears to be a bracket for some sort of switch in the cash drawer.
He provided a laminate counter top that I ripped down for proper depth and attached with screws from the underside.
It's 8 individual cabinets 20" wide, 21" deep and 38" tall with leveling feet. I found a wire and what appears to be a bracket for some sort of switch in the cash drawer.
He provided a laminate counter top that I ripped down for proper depth and attached with screws from the underside.
I can’t find any !!!!
Last edited:
I needed one of these yesterday, I had to do a spindle bearing on the Suburban.
When you get older and your hand strength goes down hill, you adapt. I finished the boat fuel lines. Then bought this.
-AN fitting installer.
-AN fitting installer.
Last edited:
Drill sized air compressor.
This is what happens when you watch too many youtube instructional videos.
I cant even remember what the video was or what it was about, but I had to have this piece after watching it in use…
Its noisy, its cheap (but highly rated on Amazon) bulds up to 160#, and way easier than taking an air tank or a compressor to the track especially if you dont have any electricity to run one, like on an open trailer.
Also good for pumping up air floats for the pool and sports balls requiring air.
Turn it on, set the air pressure and let er pump.
$36, and it can use 20v Dewalt batteries as well.
This is what happens when you watch too many youtube instructional videos.
I cant even remember what the video was or what it was about, but I had to have this piece after watching it in use…
Its noisy, its cheap (but highly rated on Amazon) bulds up to 160#, and way easier than taking an air tank or a compressor to the track especially if you dont have any electricity to run one, like on an open trailer.
Also good for pumping up air floats for the pool and sports balls requiring air.
Turn it on, set the air pressure and let er pump.
$36, and it can use 20v Dewalt batteries as well.
Thank you !
