CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Got any cool tools lately?
- Thread starter nvrenuf
- Start date
Spray painted from underneath, and punched with arbor punch, block of wood used
That looks a lot like a big version of the leather punches I have.
That one is from a set from horror freight. 5 or 6 sizes. Have had for many years, made tons of gaskets. I have some larger ones acquired at yard sales antique stores etc
I have a variety of these, I don't know how get by without these tools
beags86
Eastbound and Down
Not something I bought. But found on Amazon.
Brilliant.
Brilliant.
Made a cool tool today.
I could not get the releases squeezed on the fuel tank lines on a Ram 5500. I have to drop the tank to add a generator pickup and return.
Fought for 20 minutes. Made this and each took 5 seconds.
I could not get the releases squeezed on the fuel tank lines on a Ram 5500. I have to drop the tank to add a generator pickup and return.
Fought for 20 minutes. Made this and each took 5 seconds.
Bought a wide angle yeswelder helmet. Big upgrade from the hf special.
Put outside in the sun, didn’t expect weather to change so fast.
Put outside in the sun, didn’t expect weather to change so fast.
I have the Miller version of that. I still can not see my welds. So they still suck.
Lol. I've been using a work light when welding, helps a little.
Ran out of gas, couldn't' try this one yet.
Got this compressor from Harbor Freight for $80 plus I sprung for the 2-year warranty for an extra $17. It has a max PSI rating of 150 PSI so I can air my 38 inch tires back up after wheeling.
I should have done what everybody else does, and just post a picture with no information of what it is, and just let everybody F**cking guess what it is.
I should have done what everybody else does, and just post a picture with no information of what it is, and just let everybody F**cking guess what it is.
That was a lot cheaper than my Viair. Be a good alternative, let us know how it holds up over time. Buy a couple to keep in various vehicles/campers ect.
And I thought it was about the portaband table...
Also, don't air your tires to 150 psi!
Last edited:
Air down a wheeling tire to trail rating, then time airing it back up. And let us know. I don't think my tires have had more than 18 psi in them in a few years.Got this compressor from Harbor Freight for $80 plus I sprung for the 2-year warranty for an extra $17. It has a max PSI rating of 150 PSI so I can air my 38 inch tires back up after wheeling.
I should have done what everybody else does, and just post a picture with no information of what it is, and just let everybody F**cking guess what it is.
I have 2 of these and one crapped out after a few months.Got this compressor from Harbor Freight for $80 plus I sprung for the 2-year warranty for an extra $17. It has a max PSI rating of 150 PSI so I can air my 38 inch tires back up after wheeling.
I should have done what everybody else does, and just post a picture with no information of what it is, and just let everybody F**cking guess what it is.
They are pretty good, fast but I was doing 4 tires in a row and first the switch got stuck on.
I bypassed it and unhooked the battery clamp to turn it off.
The next day the motor seized.
Keep your receipt. It’s good till it ain’t.
last one I had I was airing up a trailer tire and it popped a hole in the line; took it back, got another one and haven't used it yet
This is the reason I got the extended 2-year warranty because I know this type of equipment can burn up quick. Even thought I have the receipt the warranty is tied to my phone number.
I bought this a little while ago, figured I would review how it works. No more grinding/sanding the end of a cut off bolt.
GO BUY ONE.
GO BUY ONE.
Which brand is that? I was super excited about the uniburr, and mine is super dull. Hardly does anything.
