CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
How will my K5/truck look with xx" tires on xx" of lift?
- Thread starter steve_kibbe
- Start date
AlexHowland
Newbie
need to get rid of the rust
If any one out there can help I need to find Floor pans for a 79 k5 blazer does any one know where to find them I have a lot of rust i need to get rid of.
If any one out there can help I need to find Floor pans for a 79 k5 blazer does any one know where to find them I have a lot of rust i need to get rid of.
FLgmcJIMMY
Registered Member
If any one out there can help I need to find Floor pans for a 79 k5 blazer does any one know where to find them I have a lot of rust i need to get rid of.
Not the correct thread, but i would try LMC Truck parts. I haved good things bout their patch panels.
And to keep it on Topic.....
Here is my 1990 K5, i know its not everyones style, but its a 6" Rough Country Lift, with 37" Toyo Muds on 20x10s
![DSCN0980 [640x480].JPG](https://ck5.com/forums/data/attachments/69/69038-5072ead6832fcdedaa4c4bf00b4903d8.jpg "DSCN0980 [640x480].JPG"){kind=small}
jonathon
1/2 ton status
It's a street rig and I don't really feel like messing with pinion angles. It's perfect as it sits and I think with a lift block it'll remain the same or similar. Burbs have a lot of driveshaft, with the 4" block clean shaft didn't even come past the slip yoke seal.
When do the SYE I think I'll do a flip.
BRIAN THOMAS
Registered Member
42" 6" 2" 28 1/4 frame to ground.
desertrat67
Hawk Driver
42" 6" 2" 28 1/4 frame to ground.
I think I just...
[youtube]http://www.youtube.com/watch?v=4pXfHLUlZf4[/youtube]
desertrat67
Hawk Driver
damn. Self caught fail
BRIAN THOMAS
Registered Member
The sercond picture was from Blazer bash 05 and the person taking the picture must have a real short right leg. Look at the picture and you will see they turned the cammera.
'86erfixer
1/2 ton status
BRIAN THOMAS
Registered Member
Thanks guys.
katugly
1/2 ton status
33" BFG A/T KO on Stock Wheels
Stock Lift with saggy springs
Had to trim the rear of the front QP
Stock Lift with saggy springs
Had to trim the rear of the front QP
Last edited:
mine again with bigger tires.......
8inch superlift front springs, diy shackle flip, 4inch rear springs....tsl 39.5x15x15...
8inch superlift front springs, diy shackle flip, 4inch rear springs....tsl 39.5x15x15...
ba3jbrown
Registered Member
89 Burb
6" Procomp front and rear. 35" Nitto on 16" Ultra. Disc brake rear. DIY4x shock inboard kit. 350 Vortec, Ramjet cam, Edelbrock MPFI, Command Performance chip, Edelbrock headers, Performance/Towing built 700R4. 14BFF & D44(Looking for D60). Lockers on the way!
6" Procomp front and rear. 35" Nitto on 16" Ultra. Disc brake rear. DIY4x shock inboard kit. 350 Vortec, Ramjet cam, Edelbrock MPFI, Command Performance chip, Edelbrock headers, Performance/Towing built 700R4. 14BFF & D44(Looking for D60). Lockers on the way!
muddycowboy
Registered Member
all nice trucks
jeff_buob
Registered Member
here is my 1980 chevy k10
fairly built small block, sm465/np205 dana 44/14 bolt combo 3'' body lift, 4'' suspension lift, w/ 1'' zero rate tires are 39.5x15x15 tsl stepping up to 8'' suspension lift this winter
fairly built small block, sm465/np205 dana 44/14 bolt combo 3'' body lift, 4'' suspension lift, w/ 1'' zero rate tires are 39.5x15x15 tsl stepping up to 8'' suspension lift this winter
zj4play
1/2 ton status
My 74' with 315/75/16's. Not sure about the lift, it was on it when I bought it.
desertrat67
Hawk Driver
Looks like 4" by the arch of the front springs.
zj4play
1/2 ton status
Thanks desertrat...actually in the process of looking for some used stock springs to drop it down. Don't really want the lift on it.
