CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

How will my K5/truck look with xx" tires on xx" of lift?

Had to put the 33's back on so I can paint the other wheels so I snapped a pic to show a 4" lift on 35's compared to 33's.

35's
35snopaintwheels.jpg


33's
Afterlifton33sagain.jpg

Afterlifton33s.jpg
 
This is the way they should have come from the factory.

Afterlifton33s.jpg
 
This is the way they should have come from the factory.

Afterlifton33s.jpg

if this truck has 4" with 33s what do you guys think my truck is? stock or lifted a little? it does have 2" blocks in the rear but i thought they were factory? these tires are 33x12.50x15s.

100_4489.jpg
 
Well I would say you have a 2" lift then!!! lol

haha so they dont come with lift blocks in the back from the factory then? i cant see any way that the front was lifted.. the springs are just about level(no arch to them) no blocks up there and the hangers and shackels look stock to me.
 
Well stock front springs had a negative arch to them so if they are flat then I would consider them to be a lift spring.
 
if this truck has 4" with 33s what do you guys think my truck is? stock or lifted a little? it does have 2" blocks in the rear but i thought they were factory? these tires are 33x12.50x15s.

100_4489.jpg

That's a clean looking Blazer, nice!:waytogo:
 
77' K5
-Rear: DIY4X 4" shackle flip with 56" springs
-Front: 56" front springs with DIY4X 7.25" shackles.
-about 4-5" of lift.
- 39.5X13.50R17 Super Swamper IROK bias 112" Wheel base

0912091709a.jpg

DSCN0363.jpg

IMG_20110505_084602.jpg

IMG_20110505_084636.jpg
 
Man that thing looks beautiful!! Who did the paint. I like how you've got the winch cable coming out of the stock bumper. I haven't seen a stock-looking truck that looks that clean in a long time. :bow:
 
Thanks. It's the stock color, just re-sprayed a few years back. Its an oddball truck (farm truck). 6.2, 700r4, dual tanks, AC, power windows/locks, and cruise.

I wanted the winch out of the way, so I mounted it between the rails on 1/4" steel plate. The control box is under the hood, so I can run the cable inside the truck. I really havent needed it yet. Other than some minor electical gremlins, its been a good truck. I had to replace the hydroboost and a few other silly things.
 

Latest Posts

Top Bottom