CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
humvee wheels!
- Thread starter johnnz28
- Start date
if you want to get recentered h1's with rock rings and you get the powder coat...I just did that and I wished I'd just bought purpose built beadlocks like walker wheels...if you just get stock h1's and spacer thats a different story
Maybe. Hard to say. You could probably just adjust the steering stops to prevent the tires from rubbing the drag link.
Did you not notice the bold part in my post? I know what a rock ring is, and what it does. I was questioning the other suggestion, hence highlighting it in the post I quoted.
Martin
Swanson52
1/2 ton status
No dog in this fight, but if he's reading it on Tapatalk (like I am), there's no bolded part in the quoted part of your response.
Carry on!
the inner lip is just as easy to bend as the outer lip. But you cant put a rockring on the inner side. the 3/b bar ring aroud the lip stregnthens it just enough to be fine
i have hummer wheels on mt 87' i purchased new center sections from usa 6x6 (out of buisness) im running 40'' TSL's. i had to cut out the stock center and weld in the new.it wasnt too difficult,and the axle has held up fine.and it is 5.5 inches of back spacing. i believe you can acuire new center sections from ststzworks.com.
