What exactly is this, and is it good to use for anything worthwhile?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Hydraulic pump?
- Thread starter USSkoval
- Start date
electric hydrolic pump unit.
check the tag for voltage needs.
use it for some things like remote mount plow pump/ hydrolics on yo rid hom boyyy / other things needing hydrolic power.
by looking at the unit its a power up and float down more than likly. so single acting ram use and gravity pressure to drop. prob from a lift gate setup on a box truck.
check the tag for voltage needs.
use it for some things like remote mount plow pump/ hydrolics on yo rid hom boyyy / other things needing hydrolic power.
by looking at the unit its a power up and float down more than likly. so single acting ram use and gravity pressure to drop. prob from a lift gate setup on a box truck.
The switch box says "raise" and "lower", then that little tag shown has a "12" in the little area with the V next to it. There is another tag on it that says it has been rebuilt, and it was spotless clean when I found it. It's been sitting in my storage unit for a while, I'd have to move six doors and a tailgate to get it out.
ya solinoid for power up. and still need one for down. might be power down tho. cant tell.
but not a bad thing to have on hand for what ever.
hell make a rig for it to bolt on truck and crush beer cans FLAT .
but not a bad thing to have on hand for what ever.
hell make a rig for it to bolt on truck and crush beer cans FLAT .
DEMON44
Low-Tech Redneck
ive seen them on 4 post lifts. anything that needs hydraulic power. cabover OTR trucks often have a small electric over hydraulic like that. with a manual backup.
Oh yeah, it's kinda hard to tell in the pic, it's probably about 1.5 feet in length.
