CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Introduction & K5 Blazer Build Ideas....

would you be willing to pay for someone's time and gas close by to trailer it home for you? You are in CA, there are many ppl here with trailers, and a few that might be able to help. I'll do it, just don't know about urs or mine schedule and how fast you want to bring it back. Are you in Reno?

Otherwise throw some stop leak in it, update your AAA to 100 mile towing, and drive it down the 101 or 1 or whatever keeps you out of the desert.

OO and I'd drive it, replace the plug, and use it for a DD until you do a lake trip. This way you can get a feel if you wanna tow with it. If all is good, keep using it till you're ready for an engine swap.
 
Otherwise throw some stop leak in it, update your AAA to 100 mile towing, and drive it down the 101 or 1 or whatever keeps you out of the desert.

Bad advice. Just so people know a vehicle like this does not qualify to be towed by 3A. The suspension has been altered and has larger than stock tires. Not saying that it wouldn't get towed, I'm just saying it's not supposed to be. I wouldn't do it myself, and I have turned plenty of people down due to lifted vehicles. They get seriously pissed off at me when I do and call and complain, but they never come out on wining end of the argument.
 
Why are you so opposed to pulling the trans/t-case to replace a freeze plug? I mean it's only a couple hour job at best if you have any kind of wrenching skills and a place to do it. It's not like you have to take the trans/t-case completely out of the vehicle, it only needs to be moved back a few inches so you can remove the torque convertor (so you have room to swing a hammer) and the flexplate. Just remember to install BRASS freeze plugs so you don't have the issues ever again.
 
The dealer is who's looking at it and giving estimates, so they are probably high on the tranny removal. I think they are calculating a full removal, as opposed to pulling it back a few inches. They quoted like 6 hours (ouch).

As far as the towing, I did not know that about altered suspension. I'll check into that, as I would be going across the desert on a regular basis. That could be an issue.

I'm waiting on final word from the dealer to confirm what it really is that is leaking. I'm getting a really good deal on this blazer and the owner doesn't want to lower the price anymore, so I'm going to go ahead and pay for it, depending on the estimate.
 
The way I see it, buying it from a distance, and considering it's current condition and what you plan to use it for. I would have the repairs done to get it home without issue. That way, you can use it for the rest of the year and even next year if you wanted to with the current drivetrain. That way you can focus on any other upgrades or modifications for your intended use. Then you can upgrade the engine/trans later when everything else is done to your liking.
 
Bad advice. Just so people know a vehicle like this does not qualify to be towed by 3A. The suspension has been altered and has larger than stock tires. Not saying that it wouldn't get towed, I'm just saying it's not supposed to be. I wouldn't do it myself, and I have turned plenty of people down due to lifted vehicles. They get seriously pissed off at me when I do and call and complain, but they never come out on wining end of the argument.

Interesting, I have not been turned down (twice) by AAA drivers with my altered rig (in sig line). Simply told them what it was and a flatbed arrived. Maybe some are just lazy pricks? Are you a AAA driver? If so, what would your beef be with a blazer like the op is buying? Policy? Just curious...
 
Bad advice. Just so people know a vehicle like this does not qualify to be towed by 3A. The suspension has been altered and has larger than stock tires. Not saying that it wouldn't get towed, I'm just saying it's not supposed to be. I wouldn't do it myself, and I have turned plenty of people down due to lifted vehicles. They get seriously pissed off at me when I do and call and complain, but they never come out on wining end of the argument.
I have to defend myself, only cause I've never been turned down either. Maybe this is policy, dunno, just saying from experience. I've had a 2007 3500 longbed Duramax Crewcab 4x4 lifted 6" with 35" tires....towed 3 times. Also a stock '97 dually crewcab. Both trucks need the larger flatbed. I've had to wait cause they either send small trucks or small flatbeds, but never turned down.
:dunno: But I will call AAA now to confirm I'm covered. I increased my towing to 100 miles once I got the blazer.
 
Okay, they have now looked closely and figured out it's an intake manifold leak that is so small that it would evaporate before it ran down the back of the block. So, no freeze plug problem after all. Gotta love preliminary info. I'm going up Friday to pick it up and drive it home. Maybe I'm naive, but not too concerned about the leak until I get it home, where I can take care of it myself or have it done much cheaper than a dealer. Probably a hose for all I know.
 
Years ago I had a leak like that on my '92 TBI 350. Drove fine like that for a good long while. Granted I wasn't in Death Valley but I still only noticed after probably months and months (and a trip from San Diego back to Grand Rapids, MI) worth of regular driving when it started to put a quarter sized spot of coolant on the ground towards the rear of the engine.
 
Years ago I had a leak like that on my '92 TBI 350. Drove fine like that for a good long while. Granted I wasn't in Death Valley but I still only noticed after probably months and months (and a trip from San Diego back to Grand Rapids, MI) worth of regular driving when it started to put a quarter sized spot of coolant on the ground towards the rear of the engine.


This is what I'm counting on. I've seen it before, just as you described. Temps are supposed to be in the mid to high 90's on Friday all along the route. I'll see how it looks on the temp gauge and keep it easy on the gas. I still can't get over the 32 gal fuel tank. That is awesom. I'll only have to stop once for fuel closer to San Diego than Reno for sure. I assume mileage should be 10-15.
 
When my rig was stock I was pulling 14 mpg on the freeway at an average speed of 75 mph. The gas tank is actually a 31 gallon tank IF it's the larger tank or 25 gallons if it's the small tank. Just for reference, when my tank hits the "E" there is 4 gallons left. I have pulled the sender and checked the ohms and it does read 0-90 ohms which is what it should be. When the tank is full the gas gauge reads above the full mark by about what would be about 3/8 tank or about 1/2" past the full mark. I'm giving you this info so you can kind of judge what is going on and what to expect. If you want I can PM you my cell number in case something happens and you need advice.
 
Interesting, I have not been turned down (twice) by AAA drivers with my altered rig (in sig line). Simply told them what it was and a flatbed arrived. Maybe some are just lazy pricks? Are you a AAA driver? If so, what would your beef be with a blazer like the op is buying? Policy? Just curious...
I have to defend myself, only cause I've never been turned down either. Maybe this is policy, dunno, just saying from experience. I've had a 2007 3500 longbed Duramax Crewcab 4x4 lifted 6" with 35" tires....towed 3 times. Also a stock '97 dually crewcab. Both trucks need the larger flatbed. I've had to wait cause they either send small trucks or small flatbeds, but never turned down.
:dunno: But I will call AAA now to confirm I'm covered. I increased my towing to 100 miles once I got the blazer.
Ok guys I will try to answer your questions as best as I can. Yes I am a 3A driver. First off your not always gonna get turned down. Some 3A contractors will haul anything. Reason being for the most part is they don't want to lose the money. Another reason is some wont turn you down is because all they use is flatbeds (due to the fact most drivers can only operate a flatbed) so they figure what the hell haul it anyways. I will admit that a lot of 3A drivers are focking clueless and don't care, nor do they know what they are doing. Heaven forbid they actually had to use a real tow truck.

Ok so here is what my beef would be with the OP's Blazer if I were called out to tow such vehicle. First off he would not get a flatbed. Reason being is because flatbeds are medium duty trucks. 3A only pays the contractors light duty rates. Let me put it this way, our light duty trucks go for $170 an hr and our medium duty's go for $230 an hr. Therefor we wont run a flatbed big enough to haul a K5 and not get paid for what the truck is worth. Simple as that, it boils down to profit. Yes we have light duty flatbeds, but putting a K5 on them puts them over weight at the scales. They are intended for the smaller AWD cars.
The proper way to tow a K5 is with a conventional sling truck from the rear. So if I show up in my conventional and the K5 is sitting on a 4" lift and say 33-35" tires it is to tall for my equipment. I would simply tell him that he would not be getting towed under 3A Tow trucks were designed for stock height vehicles it's as simple as that, and yes it is 3A's policy.

Now onto Octanes two trucks. I would not tow either of them under 3A. Both are 1 tons and 3A does not cover for 1 tons or larger vehicles, not to mention the lift on the D-Max. Again they cover us to run light duty trucks and there are weight restrictions. Myself I would tow both of your trucks, but you would be paying for it yourself out of pocket. I would also use a medium duty sling truck and tow both of them from the rear. Oh and trust me it can be done safely with out any damage. Just have to know the tricks of the trade.

People think because they have a 3A card that some how they are magically covered for any situation. There are so many rules and regulations it's not funny. For instance..... If you are on a dirt road that is not county maintained year round then you are not covered by 3A. We charge the commercial rate from the time we leave the pavement to the time we get back to it. Do people get pissed off, hell yes they do. Bottom line is we don't work for free though. Another one is if your vehicle does not have current registration or a moving permit then it's not getting towed. Want the old beater out back towed to the local wrecking yard? Sorry your SOL, they don't cover that. Have more than 2 people in the car? Well to bad sounds like someone is doing some walking or calling for a ride. Like to have old Rover sit on your lap? To bad his ass can ride in the towed vehicle, unless he is a service dog, and his ass had better be small and for a real good reason.

I could go on and on about this guy's, but I think you get the point. I have people argue with me on a daily basis as well as 3A's own dispatchers about the policy's and I have never lost an argument. Myself and the company I work for follow the rules. Problem is most Members are unaware of the rules. Oh and one last thing. People who think that I am there to take their frustrations out on are sadly mistaken. I will leave their ass on the road side and not think twice about it. They can file a compliant all they want.
 
good reply and info
I can't believe they would have a problem with 1tons. Considering they know what the truck is when it's insured and tow covered LOL. They god damn better tow it, going to charge coverage rates and not COVER it pff. The lifted one, I can see, but any stock one no. Most 3/4ton trucks are the same now a days anyway. hmmm
interesting stuff Mr. Corey
 
good reply and info
I can't believe they would have a problem with 1tons. Considering they know what the truck is when it's insured and tow covered LOL. They god damn better tow it, going to charge coverage rates and not COVER it pff. The lifted one, I can see, but any stock one no. Most 3/4ton trucks are the same now a days anyway. hmmm
interesting stuff Mr. Corey
Don't get me wrong here I don't always agree with everything. To me a SRW 3500 is the same as a 2500, and we will tow them as long as they are dead stock and write them up as a 3/4 ton. A dully though, no way unless it has a camper and you ponied up for the RV package.
Remember when you get your 3A card it is not for one vehicle it is for what ever you are in at the time as long as it falls into the guidelines.
 
This is what I'm counting on. I've seen it before, just as you described. Temps are supposed to be in the mid to high 90's on Friday all along the route. I'll see how it looks on the temp gauge and keep it easy on the gas. I still can't get over the 32 gal fuel tank. That is awesom. I'll only have to stop once for fuel closer to San Diego than Reno for sure. I assume mileage should be 10-15.




Is it not possible for you to drive at night.:confused: Just wondering, it would be less traffic, and a lot cooler, for you and the blazer. That's what I would do if I had a concern of over heating. Just start in reno around 5 or 6 pm, and you will be home at about 3 am. Safe and sound, with no over heating. That is if the only worry is a small water leak. Plus lots to do in Reno. Just make sure you don't brake the bank in the casinos.:haha:By the way nice find. The blazer all in all looks nice. Can't wate to see your build. Good luck on the drive home.
 
My wingspan is right at 6'. I can just touch the doors edge and an inch short of the tailgate. lol
So the inside would be under 6'. Somewhere around 4" less prolly.
I plan on sleeping in mine too. I'm 6'1" and I don't think I can stretch out.

im 6,3 and i sleep in the back of my 76 k5 everytime i go to hollister with no squeezing.
 
^^^ good to hear
Though I've thought about it, I haven't slept in my project yet, too many parts back there.

Whats it like with the bench folded forward, or do you take it out? To me, it just didn't look like there was room, with bench out.
 
Last edited:
I used to sleep in the back of mine a lot. One problem with the 78-91 K5's is the dropped rear floorboards for the rear passengers. What I would do when I knew I was gonna be sleeping in the back was to bring the tools to remove the rear bench. Then I had a piece of plywood that sat on some wood blocks to bring the floorboard up level with the rest of the rear cargo area floorboard. It was cut so that the drivers seat had to be slid forward and the passengers seat was flipped up. It gave plenty of room for me to sleep in the back and I am 6' even. That is with a pillow and not having my feet crammed into the tailgate. Worked pretty good to tell you the truth.
 
Top Bottom