What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Introductions & Greetings

Hi everyone my name is Seth and I am from Arizona. 1977 k5 blazer 4" lift on 33" tires hoping to step up to a 6" and would like to make it a full convertible but currently its my project/ daily driver
 
Howdy

Hi, I am Mark. My wife and I just purchased a 1988 Blazer. This both of ours fist 4x4. No, big plans for it right now just fixing neglect of previous owners and making small upgrades along the way. Looking forward to getting a little mud on the tires.
 
Hi all my name is Andrew im 17 from Brighton,MI, My first vehicle is a Chevy Blazer M1009 ex-military vehicle with a 6.2 Natrually asperated diesel, i love working on this truck, it has been a good project for me, since i like to work on cars, motorcycles or anything that uses gas or diesel.
 
Hello from Central Wisconsin

Hello everyone. I have a 1987 GMC Jimmy with a rebuilt 350 tbi, TH350 transmission, NP208 transfer case, Dana 44HD 8 lug front axle with locking hubs, GM FF14 bolt 8 lug posi rear axle with 4.56 gears front and rear, 35x12.5x15 MTs,15x10 chrome steel wheels , 6 inch suspension lift, no body lift, headers with glass packs and the body is in ok condition.

DSC01326.jpg


DSC01332.jpg


More pictures can be seen at
http://www.wi4x4.com/forum/viewtopic.php?f=7&t=3275&start=0
 
Last edited:
Hello from Germany!
My Hobby is 84 Jimmy.I restore it from Nov.09 to May10.
Had the first Contact with the dreamcars in 1991 .I was in SHILO with the German Army .we had 9 month fun.
After some Trans Ams & a Blazer i have now a Jimmy .
BTW. this is a great side.
Sorry for my bad English
 
Hello All,

My name is Quinn I'm 19 and my Father and I decided to start our 1973 K10 Stepside project. Current state it is bare frame getting ready to be sent out to be sand blasted and por-15. Upside of the project we have just bought two full size axles out of a military truck. 4.56 and lockers.:D Downside is everything else about the truck we just keep running into problems. Like we thought the 427 motor was the most sound part on the truck but when we pulled it, it had a huge weld across the side:( Our frame was tweeked so the frame shop decided to re-welded not bolt it like factory:( Im new to chevy facts, I spend most of my time on the powerstroke.org forum but I am egar to learn more about these simple trucks. I will start a thread about the project and will have plenty of k10 suspension parts if anyone is interested.
 
glad to be here

hey all glad to see theres a site like this...love burbans and especially the ones with diesels...
 
77 Cheyenne with 26k original miles for sale...

Hello,
I've been a member of Colorado K5 for quite a while and Unfortunately I need to sell my 77 K5 with 26k original miles. It truly is in new condition.

email me at [email protected] and I'll send you whatever info you like.

Thank you for looking..
Korey in NH
 
Last edited:
hello from pennsylvania

well i have a 87 k5 lifted, with 42s, but im building my boy a 1969 k5 blazer picts to follow
 
Wassup Fellers! Got a 86 Jimmy, lifted, locker, mt's the usual stuff, all built not bought, gotta get pics on here asap, was on fullsizebronco for couple years but guess im joinin the dark side now
 
Hows it going, im Dylan. I'm from Sacramento, CA. Im a Service driver and a Tow Truck driver for a AAA contractor. I have an 83 K5 6.2. I brought it home from Idaho a few months ago, and been fixing all the Redneck upgrade/shortcuts on it. I'm hoping to increase my knowledge here. This is my first Diesel, and have soaked in as much knowledge as possible from the Shop Mechanic, but I would love to have some outside source for some help.

Howdy.
 
what's up. Tyler, socal. just purchased a CUCV. it's broken. trying to get it running. OUT.
 
Hey all,
My name is Ty, from central illinois currently looking for a K5 figured this would be the place to start. not looking for anything special but not looking for one thats needin a body off restoration :)
 
Howdy, new to the forum, not so new to K series trucks, I have a 78 K5 sitting on 37" Iroks, barely legal exhaust, 7" total lift. It runs great, looks like hell, but tha makes her better on the trail and in the desert here in El Paso.
 
hey guys, names tim from lagrange ky. im rollin an 83 k5 all original w 305 80k miles. still has cruise and a/c. only mods is its converted to 3/4 ton and lifted on 44" tsls mounted on 15x14 bart wheels
 
hello everyone. my name's phil, from SE mass. currently have an 82 k-10 swb (i know not a k-5, but the info is relevant!) with a 2.5" lift, 33x12.5 tsl's, 355, th350, np208, sitting on 10 bolts for now. thanks!!
 
REILLEY said:
Wassup Fellers! Got a 86 Jimmy, lifted, locker, mt's the usual stuff, all built not bought, gotta get pics on here asap, was on fullsizebronco for couple years but guess im joinin the dark side now
Click to expand...

No no, you've got that wrong. You're leaving the dark side:D
 
Hey fellas my name is Bran Antkowiak

I'm new to the forum and also to MD. I just moved here from idaho and would like to find fellow Chevy wheelers to wrench and hang out with, so shoot me a pm if you're anywhere new Glen Burnie.

Here's my rig Spec:

84 k10 lwb shortened to a swb
350ci
SM465
np205, twin-sticked
Dana60 w/ crossover, 4.10
14 bolt, 4.10 (hoping to get a detroit soon, if not i'll weld it)
52" front springs axle 5" forward using Diy4x brackets
64" rear springs w/ homebrew shackle flip
39.5" Tsls or 35" Dynapro M/ts for the street
 
You must log in or register to reply here.

Latest Posts

Top Bottom