pennsylvaniaboy
1/2 ton status
Gore.......Big dogs is up that way.....I might need to stop by sometime.
How is gore and big dogs? Im familiar with a rock run/ rausch type terrain....
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
its been a while i guess ill start a build thread..
- Thread starter twoslo4five0
- Start date
How is gore and big dogs? Im familiar with a rock run/ rausch type terrain....
ive wheeled big dogs, it was the tigest place ive been. i quite enjoy bouncing of trees 
here are some pics from there.
here are some pics from there.
i quite enjoy bouncing of trees
Much to the dismapproval of the sheet metal gods lol
tell me one thing that sheet metal is good for besides looks on a crawler. plus to me tube looks 10 times better than sheet metal. i dont understand why people spend time building buggys which is basically art with tube and cover it up. makes no sence.
update- reincarnation coming back soon 
last pick taken of it sept 6 2013, been in storage. Coming back
last pick taken of it sept 6 2013, been in storage. Coming back
79pen
Registered Member
Bout time .
Updates
I picked up a cab and got a 14 bolt tossed in with it. I also went and picked up the banana. She has been sitting for a few years but v2.0 should be a new chapter in her life. Anyway I will let the pics do the talking
I picked up a cab and got a 14 bolt tossed in with it. I also went and picked up the banana. She has been sitting for a few years but v2.0 should be a new chapter in her life. Anyway I will let the pics do the talking
After some death defying acts the chassis is in the shop
How was Big Dogs?
Every time the tires slipped the camera vibrated. Crazy how much the Trans shifter moves under load.
crazy how much the truck moves under load, Its a POS hense why the truggy is coming back.
So you're chopping up another cab? What are the plans for 2.0?
lots more kick assness ;-)
leftover cab, cage, drivers boatside and all brackets and rivets I don't plan on using on the drivers side gone. Those rivets suck.
Some updates
203/205 doubler. Came with a 32 spline range box, hydro bell, slave,for and reservoir. I have a ford 205 sitting in the floor so I will swap the front output over.
I picked up a hypertherm powermax 600 for 400 bucks
Picked up some 1.25 heims and 7/8s heims. Also picked up a BTF truss for the 14 bolt and got it stripped
Picked up the getto fab body mounts as mine were gone due to the boatsides. Boy had a 58 on a 80s frame, driving around on the road.
203/205 doubler. Came with a 32 spline range box, hydro bell, slave,for and reservoir. I have a ford 205 sitting in the floor so I will swap the front output over.
I picked up a hypertherm powermax 600 for 400 bucks
Picked up some 1.25 heims and 7/8s heims. Also picked up a BTF truss for the 14 bolt and got it stripped
Picked up the getto fab body mounts as mine were gone due to the boatsides. Boy had a 58 on a 80s frame, driving around on the road.
....
Slow progress is better than no progress. Those cast 14b bring the major suck!
