Isn't wheeling season all year round for you cali guys
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
K10: Built HP60/241-205 Doubler/tons of tube
- Thread starter Avery4jc
- Start date
Isn't wheeling season all year round for you cali guys
Especially this year, as there's been no snow! Hell, even the Rubicon is still open! The guys at WFO said that it's the best wheelin out there right now because nobody's on the trail, it's sunny and dry. However, COLD!
Especially this year, as there's been no snow! Hell, even the Rubicon is still open! The guys at WFO said that it's the best wheelin out there right now because nobody's on the trail, it's sunny and dry. However, COLD!
Cold like 50 degrees?
Well, here in Reno (very close to the Rubicon) our lows are about 10-15 degrees, highs in the 30s to 40s. The Rubicon is a MUCH higher elevation, so whatever that means.
I go to the dunes year round. The guys I crawl with tend to go in the summer.
. I can't wait to try mine out.
Last edited:
TheBeast_88K5
Banned
Sweet updates w/ the doubler, and HP60!!!!
As if this rig isn't BA enough!!!!
As if this rig isn't BA enough!!!!
Got a hydro assist cap, not sure when assist is going on but it'll be somewhere in the future so I figured I'd get the cap and install it in the box while I was putting the new one on for crossover.
My 27 spline input also showed up. Thanks 1-tonmudder!
Now I can get the doubler setup for my 700r4.
My 27 spline input also showed up. Thanks 1-tonmudder!
Now I can get the doubler setup for my 700r4.
Any plans with the 32spline input? 
Any plans with the 32spline input?
I was going to keep it since I have a th400/rebuild kit/torque converter sitting in the garage for a rainy day but I might part with it if you need it.
Let me get it torn apart and swapped and go from there.
Alright sounds good, let me know what the turn out is.
chevydan3
1/2 ton status
Project is coming along nicely Avery. I have always silently followed your builds. I seem to remember some talk of skinning the bedsides, still thinking of doing that?
Project is coming along nicely Avery. I have always silently followed your builds. I seem to remember some talk of skinning the bedsides, still thinking of doing that?
Yeah once I finish the back of the truck I'll set it up so I can put them on or pull them off. I cut the sides off of the bed before I scrapped everything, they're sitting on the side of the house waiting for me to finish.
I just threw up in my mouth a little, I didn't realize you cut your pristine rocker panels... 
BTW where's the pics of the furry dash?
BTW where's the pics of the furry dash?
I just threw up in my mouth a little, I didn't realize you cut your pristine rocker panels...
BTW where's the pics of the furry dash?
I know, looking back I should have started with something else but this has been a long evolution. I cut them before they were all smashed.
As for the other I skipped that and figured nobody would notice... but ya' caught me.
Did it ever grow back? Or did you ever Bic it?
Did it ever grow back? Or did you ever Bic it?
Nah it's stayed manageable with the buzz cut. I think stuff might be growing in it though, tree sap and dirt get all mixed up in there when we go wheelin' with the windows down.
You should try Bic'ing it then, I hear that's the only way to get rid of scabies... might work for your dash. 
LMAO you gave your dash a buzz cut....
Thats awesome.
Thats awesome.
LMAO you gave your dash a buzz cut....
Thats awesome.
Gives man-scaping a whole new meaning
