let's see some sexy engine/bay pics

[StevoandaRedK5]

Need to paint the valve covers and headers...and the body

I'll throw some specs out:

'79 SBC 350 .030 over (2 bolt main)
Iron Heads (not 2.02s)
Flat Top Pistons
Comp Xtreme 4x4 cam (12-235-2, 1000-5200)
Cloyes Double Roller Timing
MSD (Street Fire) HEI Dizzy
Edelbrock Performer EPS Intake (Non EGR)
Edelbrock Performer 600cfm Carb (1406)
Hedman Hedders (69230's?)
Flex-a-lite Stainless Flex Fan & Spacer
Accel Custom Wireset & Bosch Plugs, 4row radiator, Dorman balancer/dampener, a few other goodies...

Now I just need to get the timing set right and lean out the carb a whole lot, it gets way too much fuel, especially right off idle.

that pic of Chevy305's makes me wish I had built it for a blower...

 

[chevyuser74]

 

[DEMON44]

All GMC baby!

 

[udy2554]

560hp, 538ft/lbs. 462ci!

 

[jones]

All GMC baby!

That is BADASS! Wha5t's the poweerr output? What kind of $$/man-hours is wrapped up into that?If you don't mind me asking,of course?

 

[pennsylvaniaboy]

hey is mine if you know what your looking at

http://inlinethumb45.webshots.com/42028/2899576610100917692S425x425Q85.jpg

 

[Drey]

My old TD 6.2


My first K5 haha

 

[JDNobodi]

I need to clean it.
After I put the motor back in.

 

[mattman4x4]

Ill play:
http://i207.photobucket.com/albums/bb27/mattb3901/DSCN2115.jpg?t=1239459141

 

[mattman4x4]

Now here is my Father-in-laws hot rod engine, with out the rest of the bay!
400 Pontiac
edelbrock aluminum manifold


http://i207.photobucket.com/albums/bb27/mattb3901/Odds and ends/DSCN1912.jpg?t=1239459599

 

[ryoken]

sure, why not...

stock tbi motor... with some other projects..

some relatively substantial changes going on now... motor is now chevy orange, with some black and alum... adding a shock tower tube across the motor.... and hopefully I'll be doing the working cowl hood with air pan...

hmmmmmmm, I can't find the one of the engine on my Chevelle... polished ss firewall, all that good stuff....

 

[DEMON44]

That is BADASS! Wha5t's the poweerr output? What kind of $$/man-hours is wrapped up into that?If you don't mind me asking,of course?

Haven't dyno'd it since the swap and hotrodding adventures. it makes a bunch though. also, I have a much bigger Switzer 66mm compressor, 71mm turbine on the way to replace the HX40 thats currently on it. there way too much fuel for the HX40.

man hours, maybe 100 so far. it wasn't just an engine swap though. it was a drivetrain conversion. and I rebuilt the 47RH and converted it to 2wd with a divorced Ford NP205/

cost current to date...... including buying the whole donor truck for $2k. about $2k in billet parts for the 47RH. the reman'd and hotrodded P7100 was $1800, more than just bolt on stuff in the pump. turbo $500-ish.
plus everything that nickle and dimes you to death. new hood fenders. freightliner rims, low pro Nitto tires. its definately round the $10,000 mark just in parts. no labor costs though, my time is free.

 

[muddermilitia]

Chevy 427 with 454 crankshaft bored .030 over, 10.5 compression ratio, Roller cam, lifters, and rocker arms, High performance heads, Edlebrock RPM air gap intake, Holley 850 cfm carb, MSD distributor and offroad ignition box, Hooker super comp headers, 3 1/2" dual exhaust with electric cutouts, Dynomax mufflers. Estimated 600-650 HP

 

[udy2554]

Chevy 427 with 454 crankshaft bored .030 over, 10.5 compression ratio, Roller cam, lifters, and rocker arms, High performance heads, Edlebrock RPM air gap intake, Holley 850 cfm carb, MSD distributor and offroad ignition box, Hooker super comp headers, 3 1/2" dual exhaust with electric cutouts, Dynomax mufflers. Estimated 600-650 HP

SWEET, I love the 427's

 

[DEMON44]

now thats sexy!!!!!!

 

[NEK5]

before i pulled all the carb'd stuff

 

[jones]

now thats sexy!!!!!!

Oh yeah! tis sexy!

 

[howdiy]

Chevy 427 with 454 crankshaft bored .030 over, 10.5 compression ratio, Roller cam, lifters, and rocker arms, High performance heads, Edlebrock RPM air gap intake, Holley 850 cfm carb, MSD distributor and offroad ignition box, Hooker super comp headers, 3 1/2" dual exhaust with electric cutouts, Dynomax mufflers. Estimated 600-650 HP

650 hp on pump gas, what cam are you running? Some where around .700?

 

[Blazr77400]

Here is my old 406sb on propane.

 

[moneypit_K5]

My '55 willys... 350 sb

My '77 stepside, 400sb, burnout machine

My former towrig, freshened up GM crate 350... I love those GM goodwrench valve covers