scotto0609
1/2 ton status
I vote sell it and transport it to ny!!!! But thats just me.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Lets see those C/K30's....
- Thread starter rjfguitar
- Start date
fabjunkie
1/2 ton status
I vote drop it off in Denver on the next trip home! (after the cummins swap of course)
b-b-b-bump
not sure if yall can see this one.
its my old 87 k30 i sold to a buddy of mine. all stock susp with 36 hummer tires.
tbi 350 465 205 with 4.56's this thing screams down the highway.
then heres my 84 dually i got.
i lowered the front to about 4 inches and kept the back the same. no recent pics for some reason.
454 400 205 60/70 with 3.73 and 305's. its got a ramsey worm drive PTO winch out back too
pics here roughly 6 inches up front and 6 in the back.
then heres my beat the tar out of it and not really feel bad about it.
plans are 350/400/lomax, 60/70 5.86. ford 57 hodgepodge rears on a shackle flip with misc 56's up front, shooting for about 6 inches. H1 12 bolt beadlocks with 44 boggers.
ive already got everything for it listed and so far ive been paid 50 bucks to have it
the only thing im missing is the lomax and a front driveshaft.
the day i picked it up
muh dually axles
not sure if yall can see this one.
its my old 87 k30 i sold to a buddy of mine. all stock susp with 36 hummer tires.
tbi 350 465 205 with 4.56's this thing screams down the highway.
then heres my 84 dually i got.
i lowered the front to about 4 inches and kept the back the same. no recent pics for some reason.
454 400 205 60/70 with 3.73 and 305's. its got a ramsey worm drive PTO winch out back too
pics here roughly 6 inches up front and 6 in the back.
then heres my beat the tar out of it and not really feel bad about it.
plans are 350/400/lomax, 60/70 5.86. ford 57 hodgepodge rears on a shackle flip with misc 56's up front, shooting for about 6 inches. H1 12 bolt beadlocks with 44 boggers.
ive already got everything for it listed and so far ive been paid 50 bucks to have it
the only thing im missing is the lomax and a front driveshaft.
the day i picked it up
muh dually axles
Are those newer dodge rims on your blue '84 dually?
no theyre the stainless cap things. want em?
sixb
1/2 ton status
Here's mine!
hmatiak
1/2 ton status
'86 C30 cab and chassis. 454/SM465, 14ff w/ 4.10's. 89k original miles and cold A/C. Its gettin some fresh paint in the spring.
Here is mine. 1982 K30, 454, SM465/NP205, Dana 60, 14bff, 3.73's (ouch), 8" superlift springs in the front, ORD shackle flip in the rear with Superlift springs and 4" blocks (I want to get longer shackles, and a zero rate to eliminate the block), on 36x12.50x16.5" bias ply Super Swampers.
. . . and here is what happens when you air down to 8 psi on a 16.5's, drive it around all day with a slow leak, and then spin the rim inside the tire and rip off the valve stem from the inner tube.
This 1975 C30 belongs to a friend of mine. It was a 454 SM465, but they swapped a 6.0/4L80E into it.
It sitting next to my K30.
This is my buddy John's K30 (he is 80'427 on here). 1979 454 (was a 350, but he swapped the big block), SM465/NP205, Dana 60, 14bff, 4.10's, ORD 4" lift, on 37x12.50x16.5" Hummer tires.
Martin
. . . and here is what happens when you air down to 8 psi on a 16.5's, drive it around all day with a slow leak, and then spin the rim inside the tire and rip off the valve stem from the inner tube.
This 1975 C30 belongs to a friend of mine. It was a 454 SM465, but they swapped a 6.0/4L80E into it.
It sitting next to my K30.
This is my buddy John's K30 (he is 80'427 on here). 1979 454 (was a 350, but he swapped the big block), SM465/NP205, Dana 60, 14bff, 4.10's, ORD 4" lift, on 37x12.50x16.5" Hummer tires.
Martin
K10 KRAWLER
1/2 ton status
Here Is My New tow rig
fmstruck
1/2 ton status
Here is mine. 1982 K30, 454, SM465/NP205, Dana 60, 14bff, 3.73's (ouch), 8" superlift springs in the front, ORD shackle flip in the rear with Superlift springs and 4" blocks (I want to get longer shackles, and a zero rate to eliminate the block), on 36x12.50x16.5" bias ply Super Swampers.
Martin
It's too bad pictures do no justice to how steep that hill is. To put it in perspective, that's the lake you can see in the background, not the sky.
WAY too many M1008s get parted out by us CK5ers!
i saved one from the scrap pile. and ended up junking my m1009 to build up my m1008. talk about backwards.
found this one from mississippi, same story, gutted for the axles.
my k5 had all the one ton stuff under it already so just swapped everything over
and the finished truck
ive taken most the stickers off since its been complete
-RUSSO-
Registered Member
K10 KRAWLER
1/2 ton status
I saved pics of your truck from the for sale thread on Pirate.... definitely a nice rig!
chevysmithz71
1/2 ton status
Traded my parents 88 Suburban for this super clean 88 C30. The suburban had been on non-op for more than a year so my parents just wanted a new generator and they would call it a done deal. So a $1000 generator for them and this this dually for me.Plan is to go with a 6" lift and some 34's. I have the 60/th400/205 ready to go in.
Last edited:
BlackBourbon
1/2 ton status
Fred_M1010
1/2 ton status
Here's a poser-pic of my CUCV K30.
hickmanfab
Registered Member
My "built" 82 vs stock 88 (sold the 88 but nice comparison)
Deer Valley Trip about 3 weeks ago.
And the infamous poser pic.
Deer Valley Trip about 3 weeks ago.
And the infamous poser pic.
