What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

M1008 Cucv Ls Swap Cadolet Build, long range Blazer Bash 2026 prep

Converting my M1008 from 6.2 Diesel to LQ9 power
Overview Gallery Discussion
Cucv_M1008 said:
If I wanted to get some replacement parts for my warn premium hubs where do I get them?
Click to expand...

like this or are you needing something else?
www.warn.com

Service Parts ➜

Genuine WARN service and replacement parts to keep your winch, hubs, mounts, and snow plows performing at their best.
www.warn.com www.warn.com

Shop All Manual Locking Truck Hubs & Wheels | WARN Industries

Shop our classic Hubs and new, Epic Wheels. We are famous for our 4WD hub technology, and now we’ve expanded our product line to include the Warn Epic wheels. Shop all manual locking truck hubs and wheels here.
www.warn.com
 
I got the springs installed and the new shocks hooked up, tomorrow I'll put the hubs back together along with the breaks. and I have to wait on my 35 spline install but it will get done soon. Then I'll tie the front end back together and finish the shifter install. The shocks have way more extension than it did with a 5 inch lift. I know I'll lose some shock length once it's back on the tires.

20251006_155724.jpg

20251006_162150.jpg

20251006_155739.jpg
 
Finishing up the front end and I am working on installing my tierod and we'll my hydro assist fittings hit my springs. How can I fix this or will it require zeusing stuff which I don't have the power of greyskull to do...

20251008_155509.jpg

20251008_155456.jpg

20251008_144226.jpg

20251008_144233.jpg
 
And the other question is the other end of the ram bolted on top of the tab or is it a double shear and it's in the middle?
Lowering that end could clear the fitting.
 
imiceman44 said:
And the other question is the other end of the ram bolted on top of the tab or is it a double shear and it's in the middle?
Lowering that end could clear the fitting.
Click to expand...
It's a double sheer I'm probably going to have to get some help on moving it
 
How is the cylinder anchor attached ? Can the ram beturned 90° and have fittings face forward?

90° AN elbow screwed into cylinder and a straight end on the hose should give enough clearance. Have to double check clearance at extreme travel of knuckles
 
Wes Harden said:
How is the cylinder anchor attached ? Can the ram beturned 90° and have fittings face forward?

90° AN elbow screwed into cylinder and a straight end on the hose should give enough clearance. Have to double check clearance at extreme travel of knuckles
Click to expand...
I can turn the ram it has threads on both ends. I used field strip fittings from psc.
 
You must log in or register to reply here.

Latest Posts

Top Bottom