Kickass 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Norcal_Chris 95 Jeep build (Snowball) TH350 gurus
- Thread starter NorCal_Chris
- Start date
oooooooo so happy to see this again 
Great works man, keep it going!
little victory moment today.
Ordering fuel lines/fittings today so I can run it on more than just starting fluid
Ordering fuel lines/fittings today so I can run it on more than just starting fluid
So does that mean you need a th350? I even pressure washed it for you
Haha.So does that mean you need a th350? I even pressure washed it for you
I was gonna text you after dinner. You read my mind
Some more updates:
Life getting in the way as usual. Had a tentative compeletion date of march 1st but looks like that isnt going to happen. Ran out of money for now.
Life getting in the way as usual. Had a tentative compeletion date of march 1st but looks like that isnt going to happen. Ran out of money for now.
Moved this stupid reservoir like 4 times before I settled on this spot. Its pretty much as close as I can get it to the pump lol. I had to cut a barb off either end of the fittings for them to fit here.\
Went back and forth on T case shifters and just decided to make my own. Spent $13 on these. Seem to work pretty good. Just need a little fine tuning
So that brings it back up to speed. Still need some aluminum for the trans tunnel and the back area but floors are mostly done.
Got all my brake lines sorted out, just need to get a few fittings. Need to buy a new fuel pump, redo all the links to new material, and then start the wiring
Went back and forth on T case shifters and just decided to make my own. Spent $13 on these. Seem to work pretty good. Just need a little fine tuning
So that brings it back up to speed. Still need some aluminum for the trans tunnel and the back area but floors are mostly done.
Got all my brake lines sorted out, just need to get a few fittings. Need to buy a new fuel pump, redo all the links to new material, and then start the wiring
Wow! That's a lot going on there and it's looking great. I am curious. You seem to always get a lot of work done quickly and are back on the trails beating/testing what you built, but this project is huge. What are you driving to have fun or are you missing out on that until this is complete?
He's been slaying the streets with his powerstroke finding the weak links in his drivetrain
He's been slaying the streets with his powerstroke finding the weak links in his drivetrain
Haha basically that.
This is the longest I've been down and it is pretty depressing. I borrowed a few friends rigs and made a trip last Memorial Day, one in July and one on Labor Day. Then a couple snow trips in my truck. But this thing is winding down so I'm hoping to get a few trips in before I blow it up Memorial Day at moonrocks
Make more vroom vroom posts please.
K thanks
K thanks
Re geared front axle.
Didn't have a bearing splitter so I made one
Didn't have a bearing splitter so I made one
Stripped it down for another final weld through and to do skid plates and engine skid. Took a few others ideas on the removable skids and came up with this
you missed a spot
Stripped it down for another final weld through and to do skid plates and engine skid. Took a few others ideas on the removable skids and came up with this
Impressive!
Skids done. Finished painting it. Rolled it back in and started final assembly. Paint is dark machine grey
Well it's ready to rock this weekend.
First time it drove out of the shop
First time it drove out of the shop
Looks good.
where are you going?
where are you going?
Sand mountain fri -sun am. Then hitting Wild West Motorsport park on way home for their customer appreciation day. Gonna run the u4 track
