Off Road Parts, Dana 44, 2WD Steering box, high steer Knuckle and arms More!

[eagle mark]

DANA 44 FULL SIZE Chevy with new 5:13 gears, bearings and set up, no outers, $200.
Two Dana 44 carriers for 3:92 and up gears, $50.
Dana 44 right side high steer knuckle, milled and drilled, $60. SOLD!
Chevy 2WD steering box needed for high steer on 4x4, $75. SOLD!
Two high steer arms, drilled and tapered for knuckle, NOT drilled for TRE Or Heim Joint $75. SOLD!
Dana 44 front axle shafts, R/L inner and outer, $40.
Complete HydroBoost brake system, $100.
Big block Chevy TBI unit, no injectors, $100.
4.0L HO head for 258 Jeep engine, performance mod with 2004, tuned port, MPFI intake and DIS distributor, $200.
New 10mm spark plug wires, $40.
RobinAir R12 and R134a recovery and recycling machine with one R12 tank, work excellent, $200.
Hot Road and off road GM ECM chip tuning, LT1 reflash, EFI conversion engine transplant wiring and diagnostics, $50 up local.

Mark

 

[jake 03]

How much for the d44 knuckle shipped to 80807?

 

[munepit]

Chevy 2WD steering box needed for high steer on 4x4, $75.



What condition is this in? Thanks!

 

[eagle mark]

How much for the d44 knuckle shipped to 80807?

Price of the knuckle and whatever shipping costs, I don't know? Think it'll fit in a priority mail so pretty cheap.

Chevy 2WD steering box needed for high steer on 4x4, $75.



What condition is this in? Thanks!

Fine, I was driving the truck it came out of. Little dirty, no leaks, been inside on a shelf 2 years. Probaly $40 plus to ship depending on your location...

 

[K85 Octane]

the knuckle will fit the ~$15 usps flat rate box, even better if the studs or B-joints are missing
and the steering box cost me an arm and leg to ship, IIRC $26 Fedex, sucker is heavy

 

[80 Chevy K20 4x4]

I'll definitely take the Dana 44 right side high steer knuckle, milled and drilled, and the two high steer arms.

Let me know how much shipped to zip 97801.

Thanks.

 

[supermotard750]

I'll take the High Steer knuckle, the 2wd steering box, and the high steer arm. shipped to 92584, Paypal ready

 

[eagle mark]

I should disclose that you need 2 high steer arms, I have 2. Both are drilled and tapered for the bolts on knuckles but neither is drilled for Tie Rod Ends or the other joint that uses a bolt. Both are long enough to use a tie rod and drag link! I didn't know what I was going to use at the time and the machine shop here charges $10. for tapered tie rod/drag link holes so that's the way I ordered them.

 

[4X4HIGH]

You can ship a steering box in a large flat rate USPS box for $15.00, i've done it before.

 

[80 Chevy K20 4x4]

I'll definitely take the Dana 44 right side high steer knuckle, and the 2wd steering box then.

Let me know how much shipped to zip 97801.

Thanks.

 

[eagle mark]

Steering box, High Steer Knuckle and high steer arms are sold!