Yup that would suck. Good luck with it.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Pics of my Dana 60 14BFF Install
- Thread starter THUNDERUSONE
- Start date
y5mgisi
1 ton status
Good luck! You seem pretty darn meticulous so im sure everything will go good. I think no matter what the numbers will be good. Im sure they will be 500+ on both hp/tq which is way plenty for what your after. I just can not wait to see that motor in the engine bay!
Good luck!! That thing sure is sweet.
y5mgisi
1 ton status
Well its tomorrow. Cant wait to hear the news!
Well Im back!! I left at 6:30 am this morning so I am beat. I just got unloaded and it is 1:40am and I gotta go to work tomorrow. The motor could not have run any better. It is an awesome turnkey package. We drove it around for about 30 mins to break it in. I broke open the oberg filter and found nothing but a little bit of lint!! An engine builders wet dream!!!
I am so happy! IT was ALL worth it! I made 633hp and 678ft/lbs or torque with the accys on. I have been told that is good for 20 hp and 20 torque. If that is the case, the motor made 653hp and 698ft/lb of torque. Here are some pics....I gotta go to bed. I will post more this weekend and I have video!
I am so happy! IT was ALL worth it! I made 633hp and 678ft/lbs or torque with the accys on. I have been told that is good for 20 hp and 20 torque. If that is the case, the motor made 653hp and 698ft/lb of torque. Here are some pics....I gotta go to bed. I will post more this weekend and I have video!
Some more.
I have all the full detailed dyno sheets with all the info you could ever want to know and video. I will get it uploaded this weekend. I am PUMPED. I cant tell you guys how excited I am that this thing turned out so well. It is gonna make a great motor for the burb. It has a very mild idle and makes tons of vaccum to brakes will be a non issue. Cant wait to get the front clip off, tranny out and too the builder so I can get his some biatch in!!
brandoneh
1/2 ton status
Stoked for you man! This is going to be one wild BURB! I was telling my wife how cool it is your giving this truck a new life. Sure you could have put all this money into a brand new yukon or tahoe, but no. This Suburban is going to be one of a kind and cooler than any truck you can get off the line these days.
Wish I could see it in person. Stoked to see the videos. G'night!
Wish I could see it in person. Stoked to see the videos. G'night!
y5mgisi
1 ton status
Congrats!!
Sweet!
Good job!! It`ll be nice to see it in the burb.YOU WORK QUICK, good for you.
StevoandaRedK5
1/2 ton status
Nice!
Way to sweet!
Freakin BAD ASS man!! Stoked for ya BIG TIME!
i'm dying to see the vid!!
Rene
Rene
Here is the video.
http://www.youtube.com/watch?v=7YecMC4lBRE
This is my first youtube upload. The video quality on my computer is much better on my pc than the upload is. On my pc, you can clearly see the numbers on the dyno screen as the pull is being made. Did I do something wrong??
http://www.youtube.com/watch?v=7YecMC4lBRE
This is my first youtube upload. The video quality on my computer is much better on my pc than the upload is. On my pc, you can clearly see the numbers on the dyno screen as the pull is being made. Did I do something wrong??
With the oil at 195 degrees it makes 60 lbs of oil pressure at idle and 82 lbs at wot. With the oil around 120 degrees it makes 72#'s at idle and 90#'s at WOT.
StevoandaRedK5
1/2 ton status
I can read the numbers just fine.
Yea I can see them good too, Nice!
Good deal! As soon as my tranny parts arrive from TCI, the old motor, tranny and TC are coming out and the 4l80 is headed to the builder. As soon as it comes back, I am gonna put it all in!
