Bump. This thread needs more pictures. I could post some of my stuff of the stock steal wheels, but none of mine look that good.
Martin
Martin
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Pictures of rigs with stock steel wheels and hub caps.
- Thread starter 82355
- Start date
This is probably my favorite picture of my Suburban, I just wish it was taken with a real camera.
Martin
Martin
Only thing I have with stock steel wheels is my '86 C20 Burb, well, except the dually but that doesn't count.
These are stock optional full wheel covers and they clear 14ff hubs.
These are stock optional full wheel covers and they clear 14ff hubs.
TheBeast_88K5
Banned
Ned Kelly
1/2 ton status
I wonder if there would be a way to mount the factory hubcap to an aftermarket rim (just to cover up the center)? I too like the look of the OEM rim with pie caps, but I need 9-10" wide rims, not the factory skinny rims. I would love to get a set of TrueDesign custom rims done up in factoy dish centre with 8x6.5 bolt pattern on a 10" wide but not in my budget ($800 for set of 4 rims).
Maybe weld on some clips to the rim so that the OEM pie plate could be snapped on? Any ideas out there?
Maybe weld on some clips to the rim so that the OEM pie plate could be snapped on? Any ideas out there?
pic-1 old school gm 6 lug rims
pic 2 my take on if thay did same but 8 lug.
take aftermarket d-window rims 16x10 8 lug and blast and repaint white and use 4 rear deep drw 88-98 black plastic center caps and lug nut caps on aftermarket conversion lug nuts.
pic 2 my take on if thay did same but 8 lug.
take aftermarket d-window rims 16x10 8 lug and blast and repaint white and use 4 rear deep drw 88-98 black plastic center caps and lug nut caps on aftermarket conversion lug nuts.
I know you know what mine looks like, Marty, but i'll post these for the others. 
Most people don't like these, but I love them.
Stole this from a members build thread.
Stole this from a members build thread.
Ned Kelly
1/2 ton status
For 39.5" Swampers.
My old 85
What does the height of the tire have to do with the width of the wheel required to run it. Ebke has 39.5x13.50x16.5" Swampers on OEM stamped steel wheels.
Martin
I figured you would get a chubby over this Marty. So I snagged a pic
I only lost a bead once all weekend on my rig with stock 16.5" GM wheels and that was when we pulled it back over onto its wheels.
Martin
Martin
I forgot I never posted in here. Even though martin hates my black wheels lol.
But im kind of heartbroken you never commented on the green truck I posted above marty. I mean come on
http://s980.photobucket.com/user/ad...115-936-0000008264F40797_zpsbf6e1486.jpg.html
But im kind of heartbroken you never commented on the green truck I posted above marty. I mean come on
http://s980.photobucket.com/user/ad...115-936-0000008264F40797_zpsbf6e1486.jpg.html
'67-'72s don't really do much for me.
Martin
Martin
And it has the wrong hub caps. They look silly on that body style.
