One of these should do the trick
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
project camok5 has begun*UPDATE*8/19
- Thread starter 84gmcjimmy
- Start date
84gmcjimmy
1 ton status
LOL, I already have 3 grinders to do the job... /forums/images/graemlins/thumb.gif
Can anyone answer my questions up in my previous post?
Can anyone answer my questions up in my previous post?
DesertDueler
1/2 ton status
To get that black piece of metal out, you need to unbolt the shifter from the t-case. BTW, that is what holds the shifter, and allows it to shift, so you cant get rid of it.
Dan
Dan
84gmcjimmy
1 ton status
im boatsiding it soon, maybe... so most of that will be thick mild steel /forums/images/graemlins/cool.gif
If I can that is... /forums/images/graemlins/doah.gif
If I can that is... /forums/images/graemlins/doah.gif
K5MONSTERCHEV
1/2 ton status
Wow man, you have some work to do! /forums/images/graemlins/grin.gif
jrsheets
Registered Member
thats almost as bad as mine was, geeze, it all looks so awful, im prob gonna get nightmares again. AHH RUST!!!! /forums/images/graemlins/eek.gif
Good luck dude, its not getting it apart that fun, its trying to put it all back together and get all the squeaks out (i still can't figure all that out). Maybe its the holes in the floor where the seat mounts go??
Good luck dude, its not getting it apart that fun, its trying to put it all back together and get all the squeaks out (i still can't figure all that out). Maybe its the holes in the floor where the seat mounts go??
big83chevy4x4
3/4 ton status
[ QUOTE ]
How do I go about getting that x-case thingy out?
[/ QUOTE ]
you need to diconect the linkage from the tcase. there is a cotter pin or hair pin ("s" shapped on side and straight on the other) just pull that pin and remove the linkage.
[ QUOTE ]
if all the bolts are out, would I just beable to pry it up?
[/ QUOTE ] that sealant is actually body glue, take a few screw drivers and pry it up alittle, and just work around with the others, once you get a few pieces broke free, it will lift up fairy easy.
nice pics, reminds me of when i took my k10 apart /forums/images/graemlins/waytogo.gif
How do I go about getting that x-case thingy out?
[/ QUOTE ]
you need to diconect the linkage from the tcase. there is a cotter pin or hair pin ("s" shapped on side and straight on the other) just pull that pin and remove the linkage.
[ QUOTE ]
if all the bolts are out, would I just beable to pry it up?
[/ QUOTE ] that sealant is actually body glue, take a few screw drivers and pry it up alittle, and just work around with the others, once you get a few pieces broke free, it will lift up fairy easy.
nice pics, reminds me of when i took my k10 apart /forums/images/graemlins/waytogo.gif
84gmcjimmy
1 ton status
Okay thanks TJ, looks like tomorrow I can work on it again... yes it's a cotter pin, I tried to get that in the pic, but I don;t thuink it showed up...
OKay I have a few scrwedrivers I will use to pry it up...
When I put the tranny hump back on, should I pick up some more body glue to seal it back up?
OKay I have a few scrwedrivers I will use to pry it up...
When I put the tranny hump back on, should I pick up some more body glue to seal it back up?
