sm465 32spline short output

[Hogback Fabrication]

True but with the 32 spline short shaft y'all could corner the market on the 4spd/203 combo. It would be expensive by the time you add it all together but no one else offers it.

Right but this is almost as short and considerably cheaper than we could make it.

Honestly we just haven't seen the demand for a 465/203 adapter since they can be put together other ways than with the super rare factory adapter.

 

[cegusman]

I currently have the 10 spline 465 to 203\205 setup. If I buy this shaft and find a 32 spine input for the 203, every thing should work? Still use my factory sm465 to np203 adapter?

 

[nvrenuf]

Yes, the only other parts you'll need are 3 bushings that press onto the shaft and the usual gaskets & seals (and/or bearings as needed).

 

[Hogback Fabrication]

I currently have the 10 spline 465 to 203\205 setup. If I buy this shaft and find a 32 spine input for the 203, every thing should work? Still use my factory sm465 to np203 adapter?

Yep, you can still use the 465/203 adapter. It's always good to double check that the shaft doesn't bottom out in the 203 but everything should go together without a problem.

We have new 32 spline input gears for the 203 for $155.

 

[Blazing rockwells]

I know this is old but is this 32 spline shaft and the round adapter plate still available

 

[Hogback Fabrication]

I know this is old but is this 32 spline shaft and the round adapter plate still available

On the shelf

 

[Blazing rockwells]

How much shipped to 95901

 

[Hogback Fabrication]

How much shipped to 95901

PM sent