FRIZZLEFRY
1/2 ton status
Im not going to run any body lift
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
So will yall still be my friends...
- Thread starter FRIZZLEFRY
- Start date
spoolnaround
1/2 ton status
I caught that propane powered one at Moonlight Madness.
On second look that isnt the same rig. Same componants?
On second look that isnt the same rig. Same componants?
CDA 455
3/4 ton status
TruckNutzDude said:Here piggy piggy piggy
That is Jenga-riffic!!!!!
FRIZZLEFRY
1/2 ton status
spoolnaround said:
Yup,thats it.Did you come over and say hi?We were all camped right there together
FRIZZLEFRY
1/2 ton status
cybrfire said:
Lowering wasnt too bad.(see below)
FRIZZLEFRY
1/2 ton status
Greg72 said:
Dude,I should have used that method to lower it
FRIZZLEFRY
1/2 ton status
No real progress last night.Just got it down off of the wood and did some lining up and measuring.
Its gonna be wide
I had though in the beginning that I would move the frame back toget away from cutting into the rear doors but was unsure if the firewall would let me.With the rear axle centered in the wheelwell,this is what I have for firewall clearance.So I think I am going to move the frame back 3" and then move the front axle foreward 3".
Im going to make this gap aboot 1/2" and see where that puts everything else.Im also going to run the 55 tank because its not going to be in the way of anything.
With the rear axle centered,the body is almost even with the end of the frame.
Looks better not being on the Lincoln logs
Its gonna be wide
I had though in the beginning that I would move the frame back toget away from cutting into the rear doors but was unsure if the firewall would let me.With the rear axle centered in the wheelwell,this is what I have for firewall clearance.So I think I am going to move the frame back 3" and then move the front axle foreward 3".
Im going to make this gap aboot 1/2" and see where that puts everything else.Im also going to run the 55 tank because its not going to be in the way of anything.
With the rear axle centered,the body is almost even with the end of the frame.
Looks better not being on the Lincoln logs
Last edited:
sandawgk5
3/4 ton status
Looking good can't wait to see it done.
Ira
.Ira
FRIZZLEFRY
1/2 ton status
Pics no worky right now,so here is a link http://coloradok5.com/photos/showgallery.php/cat/500/ppuser/2393
stallion85
1/2 ton status
How come everytime I come to this thread it asks me to log into the NCBD server???
Last edited:
same herestallion85 said:
It askes me to log into norcalbigdawgs. 
it's really annoying.
it's really annoying.
The NCBD server got hacked.....
Until Jason can fix it, you will get a login challenge for each photo that is linked there..... yes, it's really annoying.
I'm sure all of my posts with photos (also linked to the NCBD photo gallery) will do the same thing.
Until Jason can fix it, you will get a login challenge for each photo that is linked there..... yes, it's really annoying.
I'm sure all of my posts with photos (also linked to the NCBD photo gallery) will do the same thing.
FRIZZLEFRY
1/2 ton status
Ok,I got rid of all my pics accept the one in the quote in Marvs post
Burt4x4
1 Ton First Gen
YYYYYEEEEEEEHHHHHHHHHHAAAAAAAAAAAAAAAAA!!!
FRIZZLEFRY
1/2 ton status
Its an abortion cuz its an IH
