steering arm removal.

[roadnotca]

hey whoever is trying to get their #$%##!@ steering arm off, i took mine off by using an air hammer, (about $20 from harbor freight with bits, if you have a compressor), you just put a pointed bit right on the cones or next to them and have at it...the vibration loosens them real good, a few whacks with a hammer and it should come right off

Another good tip. By the time I get to knock mine off, it otta jump clear accross the garage and hit the wall. Probably put an outty in my LF fender.

 

[sandawgk5]

I changed my steering arm by removing the 4 ubolts and replacing it with a dana 60 with 4 new ubolts and crossover .

Ira

 

[Chaddy]

I changed my steering arm by removing the 4 ubolts and replacing it with a dana 60 with 4 new ubolts and crossover .

Ira

You mean 3 ubolts

 

[sandawgk5]

Ya actually 3 ubolts and 2 5/8-11 X 3" bolts.

Ira

 

[colbystephens]

I changed my steering arm by removing the 4 ubolts and replacing it with a dana 60 with 4 new ubolts and crossover .

Ira

now this is wisdom.