t-case options for doubler

[1967k10]

I see a mix and match on the ORD site. Can one use a Dodge 29spline 205 behind a GM 203?? Have a potential customer looking to build a rig and I have a GM 454/400/203 and a Dodge 205 and was hoping to help him out with the Dodge 205 since 32spline GM 205's have gotten expensive .

 

[bigredblazer]

You can use the Dodge 205, you will just need to swap the 205 input to a 32 spline. We have the input shafts in stock.

 

[sweetk30]

correct me if i am wrong. but cant you use a ford 31 spline input also. ?

you might find one of them also.

 

[LT.]

This may be a little off but, I used a Dodge 203 and a Chevy 205. No problems with either. I just told them what I had and they sent every part I would need to get both under the truck. There really is no limit to what you can do with the doubler.

LT.

 

[1967k10]

Well I have the Dodge 205 and I'm trying to save him some money. If he needs a 32spline input will it bolt right into the Dodge case without machining??

 

[bigredblazer]

The 32 spline input is a direct swap for 29. They use the same bearing, so there will be no machining needed.

 

[1967k10]

Cool,Thanks. I better start grabbing up some Dodge 205's.

The 32 spline input is a direct swap for 29. They use the same bearing, so there will be no machining needed.

 

[1-tonmudder]

By all means save the 29 spline input.Around here it's impossible to find a 29 Spline 205.I know a guy who's been lookin for a year.