CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I think I still have the ones attached to my old tailgate. But shipping would be a headache, no?
How much you want for them. If the price is right I'll pay shipping.
He wants to keep for now Incase we do a bumper build .
Sorry for the delay. Here's what I have.
There is a little surface rust, but they're not rusting through.
If you want them I'll dig them both out for $50 + shipping.
I'd happily sell the tailgate or any of the pieces. That being said, this is the gate from my CUCV. The window glass is broken and the crank handle was "modified" by the previous owner to use a socket set.
The moving parts work well, but it at least needs a lock cylinder if you want to convert it back to stock operation (and it would need to attach to the non-stock socket).
It's not very rusty, but there's at least one very obvious bondo spot. And the exterior paint is peeling.
I got tired of the crank window and swapped to a truck topper and gate.
If you are interested, I can deliver the whole gate to my local Fastenal for you.
ya i think he wants stock hand crank like o.e.m design .
and our blazer build for him is a ex-m1009 . build thread in the garage . https://ck5.com/forums/threads/3-to-4-build-for-the-family-the-build-out-has-started.336341/
and our blazer build for him is a ex-m1009 . build thread in the garage . https://ck5.com/forums/threads/3-to-4-build-for-the-family-the-build-out-has-started.336341/
oh his 2 young boys think so with a monster truck build to them . . . 
In interested in the two screws, pin and retainers that hold the outer handle on.
I have those. Let me grab a picture.
Looks like it will get me going. I can use the bent rod to match up with new material.
I'd happily sell the tailgate or any of the pieces. That being said, this is the gate from my CUCV. The window glass is broken and the crank handle was "modified" by the previous owner to use a socket set.
The moving parts work well, but it at least needs a lock cylinder if you want to convert it back to stock operation (and it would need to attach to the non-stock socket).
It's not very rusty, but there's at least one very obvious bondo spot. And the exterior paint is peeling.
I got tired of the crank window and swapped to a truck topper and gate.
View attachment 295085
If you are interested, I can deliver the whole gate to my local Fastenal for you.
Curious what truck cap the rear glass came from? A 73-87 pickup cap?
No idea. I removed the window from a random topper that I found in the woods at my neighbor's house. He didn't remember what it had come from. The topper brand was Leer.
If you want to do this conversion, take your tape measure and find a topper that matches. There are a variety of widths that can fit, depending on how you cut the topper. @Blue85 did the same swap with a narrower window. I think the wider one matches the body lines more closely.
You can find pictures of both our liftgate conversions by reading this thread:
https://ck5.com/forums/threads/swapping-k5-to-truck-tailgate-and-lift-glass.334230/
And following the links in the first post.
https://ck5.com/forums/threads/swapping-k5-to-truck-tailgate-and-lift-glass.334230/
And following the links in the first post.
