LOL, I ordered that yesterday from Amazon, it was supposed to be here today but got delayed
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
This one is even better in some ways I thought.GM 4l80e Transmissions: How to Rebuild & Modify (Paperback) Book https://share.google/RURqR4XL0WhoYytGP
@folkenheath
Has been in them as well.
IIRC a 12 point thin wall socket to get the center support bolt
Has been in them as well.
IIRC a 12 point thin wall socket to get the center support bolt
This guy makes excellent transmission videos. Looks like you gotta buy the 4l80 series but I've watched the 4r100 series and it's really good and detailed.
My cleaner/tester wasn't working properly so I took my injectors to AUS injection to get them cleaned and tested. Arizona driveshaft built my new shaft in record time. It's thicc.
Always liked az driveshaft they are not the cheapest but the knowledge is great.
When I told them the weight and HP of the truck and that I was adding a trans brake, they said that they couldn't warranty it and I'd be using it "at my own risk"... I'm not sure why they said that when they use the same material on the big diesel trucks, but that's what they said. They wanted to do chromoly, but there's no way with a shaft that long.
I dropped the yoke off and ordered the driveshaft yesterday at lunchtime.
I dropped the yoke off and ordered the driveshaft yesterday at lunchtime.
You got room for a larger diameter, i seem to recall you had little room in there
I'm going to have to clearance the crossmember, but I think it will fit in my driveshaft hoop. 5" was the biggest they said they could do. I wanted to upgrade the transmission slip yoke to a 1410 to match the rear, but I can't seem to find one for a roller bearing (has to be hardened chromoly).
