CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The "under destruction builds" supersize75k5 's driveway of despair and repair
- Thread starter supersize75k5
- Start date
OffRoad
1/2 ton status
outstanding.
supersize75k5
OrganDonorRacing.com
damn, now I want one!
i also picked these up some tires..trs radials on h1 rims..near 80-90 percent on them, ill see if they fit witht heir back spacing..if not ill run them as a second set for the buggy
Last edited:
supersize75k5
OrganDonorRacing.com
it came in the mail yesterday
1978Blazerk5
1/2 ton status
Nice license Plate
Copasetic
1/2 ton status
Niiiiice! 
That's a nice touch, Shawn! I like it.
sweet plate, like the dbacks touch.
supersize75k5
OrganDonorRacing.com
simple.. currently I have a 2 piece drivshaft with a carrier bearing being that im a long bed 2wd,
the new set up will be using a divorced 205 case I picked up off craigslist, then I will use the 1st piece of my 2 part driveshaft and have a shaft from my 2wd ouput to a yoke on the t-case..turns out I also have all the parts for this out of my current driveshaft set up
This works out because it also get both driveshafts the same size front and rear..only one spare to carry.To controll it im using cable twin stick shifters mounted on a trick panel that will mount to my cage im trying to design to cleanly fit in the cab. The current plan is to swap the rear glass for lexan and have the cage also be in the cargo area. To weld it, I will cut the roof off and remove all glass as well as put holes in the floor so i can marry it to the frame. Did I mention grafting in 3x5" rec tube for rocker following the factory body lines...
after the saftey issues, and ssuspension is to my liking ill build up the 2 6.0's I picked up, one for this truck and one for the buggy.. thoughts are building both into 402 stroker motors and keeping the stock motor out of my truck sitting on a crate ready for the day the 402 goes ka-boom
first the buggy gets done..witch im working hours a day on tight now to get it that way..the idea is not to get tempted to take the this truck wheeling..
Man you are going all out on a bran new truck, It's funny to read all through this thread. I'm going to have to check it out sometime.
The current plan is to swap the rear glass for lexan and have the cage also be in the cargo area. To weld it, I will cut the roof off and remove all glass as well as put holes in the floor so i can marry it to the frame. Did I mention grafting in 3x5" rec tube for rocker following the factory body lines...
Shawn, did you ever buy this or not? http://coloradok5.com/forums/attachment.php?attachmentid=55672&stc=1&thumb=1&d=1192034326
supersize75k5
OrganDonorRacing.com
lol im not nuts right?
the guy sent me detailed pics and it had more rust then I felt like dealing with
the guy sent me detailed pics and it had more rust then I felt like dealing with
Jason4x4
1/2 ton status
Whew.... scared me for a minute there lol
