What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

The "under destruction builds" supersize75k5 's driveway of despair and repair

Thats awesome!!! Makes me want to do a SAS swap on my dmax. Just incase I have to go on a rescue mission.
 
supersize75k5 said:
Wow lots to talk about:D


1st... as much as greg drives me nuts he has a valid point on his info.. I still won't be doing an allison in the 07.. grag if you want a test bed Id consider putting the cash into my 06 and we can talk about it.
Click to expand...

It's up to you dood, but I didn't think your 06 was giving you trans issues :confused:

You're still an ass:thumb:
Click to expand...

And, your point is? :dunno: :D
 
JDNobodi said:
No ****ing wonder you are destroying 4L80es. Invest into a transbrake if you are going to be doing that crap.
Click to expand...

Now I see why he doesn't want an Allison - the Allison TCM absolutely WILL NOT let you do neutral drops. Try to put it in a gear at anything over 900RPM and it will just sit there and do nothing until the engine speed falls below that threshold :D
 
MaxPF said:
Now I see why he doesn't want an Allison - the Allison TCM absolutely WILL NOT let you do neutral drops. Try to put it in a gear at anything over 900RPM and it will just sit there and do nothing until the engine speed falls below that threshold :D
Click to expand...

Where's the fun in THAT? :dunno: :laugh:
 
That is effing insane! at 2:15 you here your truck rev to the moon and then bam! You are off! Good show sir!
 
y5mgisi said:
That is effing insane! at 2:15 you here your truck rev to the moon and then bam! You are off! Good show sir!
Click to expand...


At 1:37 you can hear it again but you cant see much of my truck in the right lane.


Makes launching much more fun, my friends said I had a lot of tire spin so I think I will lower the rpms that I launch at.

Being the truck is still together I think its finally time for a cam and nitrous:thumb:

And maybe a trans brake lol.
 
haulin out the jeep trash:D
167739_1837328981310_1483075589_32004200_2273824_n.jpg


Had wanted to save these for building a Brute of sorts at some point but I don't want another project to my list at the moment.


And damn I need to put my air bags back on:doah:
 
Took the trucks out to play tonight... no rear shocks made the 07 a handful but still fun..






Damn head lights are killing me, busted them both tonight and to add insult I then ran them over, the head light support panel broke as well and killed a tail light and the grill. I hate plastic!










Jumped the truck all night and just crawled around and finally busted something in the ORI ont he drivers side, lost the fluid in the lower chamber which is the bump stop too after a while after that then the lower shock bolt took a crap and had to call it a night..


So I unloaded the trailer off the 06 and blasted that around, smooth as hell:thumb:
 
Last edited by a moderator:
You need to tighten the loose nut behind the wheel and I don't mean the nut holding the steering wheel to the column.
 
Sweet!!! That truck holds up better then it should in reality... You are going to have to either, A) add some sheet metal to support the stock head lights, B) Just ditch the stockers and mount/run some Hella's or something like that, C) fab up some sheet metal lights that mimic the stockers.
 
I take it the lights are breaking off due the shock of the landings? You are not hitting anything with your truck.
Plastic snap together crap don't hold up very well.
 
You must log in or register to reply here.

Latest Posts

Top Bottom