k5fd89
Hold my beer..watch this!
I fit a warn 8000 no problem. bolted right in.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Twizted's Front Winch Cradle
- Thread starter TwiztedEngineering
- Start date
Jason4x4
1/2 ton status
how thick is the plate you're using?
TwiztedEngineering
1/2 ton status
blowedupmotor87
1/2 ton status
Sick front bumper! 
This is pretty much exactly what I have been thinking about for my Jimmy, except it's even better! Very nice! If I had the money, I would be snatching one of these up! 
This is pretty much exactly what I have been thinking about for my Jimmy, except it's even better! Very nice! If I had the money, I would be snatching one of these up! 
mudboggink5
1/2 ton status
I'm interested in the rear bumper, do you have any made. any pics of it installed. Thanks
Frank
Frank
TwiztedEngineering
1/2 ton status
Actually, I just got a clean Blazer here with an un-modified rear frame section a couple days ago to prototype this! I should be working on it over the next few weeks, so keep an eye open to a new post from us!
-Darren
any pics of one installed on the early style...I'm looking for something on my 76 to mount a winch.
Anyone make one work with a stock bumper yet? If not how much to add some tube to it so i can stay street legal?
Anyone make one work with a stock bumper yet? If not how much to add some tube to it so i can stay street legal?
I have one on if you want to come look at it its on a 85 Burb but you can see how it fits.
Ultimate CC
Registered Member
so this will fit a smittybuilt 10k winch? what would be the price shipped to business location at 10566
how is yours set up?
LIke it should be, I had to modify it abit to fit the 56' mounts
TwiztedEngineering
1/2 ton status
Ultimate CC - I tried to private message you, but your messaging is turned off. Please give me a call at (303) 225-0507 or drop me an email at [email protected] and I will get you pricing! -Thanks.
-Darren
what I mean is...is it behind your stock bumper?
No its mounted to the frame and the only thing there, never had a stock bumper on my truck to mount .
TwiztedEngineering
1/2 ton status
I'm not sure if the M12000 has similar dimensions to be able to fit tight under the radiator - I might have to re-design the plate to accomodate a larger drum/motor combo. I certainly don't mind making one out of 3/8" plate instead of 1/4", but give me a little bit to pull the dimensions on the M12000 and see if it's possible! I'll get in touch with you in a day or two
-Darren
cool, let me know if you need any measurements, mines sitting right here. I was thinking about fabbing a way to hide it completely behind the bumper, and it will, in fact, fit in between the frame rails/under the rad. it doesn't fit great, massaging is involved, but i got it up there for a mock up.
thanks
thanks
will it pass safety like this?
I think that leagally you have to put extentions to the tires, I'm planning on doing that, but mine has passed with it like it is.
The easiest would be o put a bar on the top that extended out to the tires pretty easy to do and basicallt my plan.
The easiest would be o put a bar on the top that extended out to the tires pretty easy to do and basicallt my plan.
Dafey
1/2 ton status
Sorry to Hi-Jack but.... You sell tie rods , how much for a 77 Chevy Blazer 4X4? Complete? With the ends and rod
