CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Twizted's Front Winch Cradle
- Thread starter TwiztedEngineering
- Start date
mudboggink5
1/2 ton status
Anything done for the rear of a k5. Those wings look good.
TwiztedEngineering
1/2 ton status
They should be... the galvanized ones don't usually fit without some massaging, but the standard 3/4" D-Shackles should fit nicely and not rattle too much
Working on a rear design right now
Expect a new thread on it within the week.-Darren
Recon!
Maniac
Darren, did you get my pm?
TwiztedEngineering
1/2 ton status
Recon!
Maniac
Sure did bud! Thanks for the order! I will get it shipped ASAP
-Darren
Sweet, thanks!
Grant
Bogger Man
1/2 ton status
Oh how I wish my winch was clockable!
crawlin k5
Registered Member
How about just the center shipped to 51027
Nice looking product by the way!
Nice looking product by the way!
TwiztedEngineering
1/2 ton status
I tried to PM ya, but I can't for some reason. The Cradle itself is still selling for $225 to CK5 members, and the "Wings" are going for $150. Shipping to 51027 will run $40 for the cradle and $26 for the wings.
Nice looking product by the way!
Thanks!!
-Darren
86K5Classic
Registered Member
Price on a cradle shipped to 36352? Also will a smittybilt XRC 12 fit it?
Recon!
Maniac
Big Truck
1/2 ton status
whats the price for the center shipped to 97838, and how do you order
thx
thx
TwiztedEngineering
1/2 ton status
86K5Classic
Registered Member
Bump
TwiztedEngineering
1/2 ton status
E-mailed you a quote - and I don't think any of the 12k winches will fit due to frame interference - you might want to trade out for a 10,000lb'er, or try it first to see just how much modification you would have to do to get it to fit.
-Darren
tunedportk5
1/2 ton status
Will a warn 12,000 fit in there?
my 9000 lb warn barely fits in between my rails doubt a 12000 would fit
tunedportk5
1/2 ton status
I haven't measured it but I thought it would be to big in one way or another. Thanks.
1st off, awesome design!
Any guide on which winches will fit? I am think a Ramsey Patroit9500? how do I know if they are clockable?
also pm quote to 47130, Thanks!
Any guide on which winches will fit? I am think a Ramsey Patroit9500? how do I know if they are clockable?
also pm quote to 47130, Thanks!
If the winch has a built in control box on the top then it would not fit the box needs to be movable. It is a tight fit the cradle doesn't hang much below the spring mounts.
On mine I have enough room to get in with my hand and turn the freewheel lever and that is about it.
Put up some pics do you can get a better idea.
I had to trim mine around my front spring mounts cuz I have 56's and my frame was bent at one time so it didn't want to bolt in the rear bolts but other then that I have no complaints. I have used the winch and its still there so it seems to work too
On mine I have enough room to get in with my hand and turn the freewheel lever and that is about it.
Put up some pics do you can get a better idea.
I had to trim mine around my front spring mounts cuz I have 56's and my frame was bent at one time so it didn't want to bolt in the rear bolts but other then that I have no complaints. I have used the winch and its still there so it seems to work too
