Ultimate cooling set up

[Chris Ziemer]

Boy, as usual, you guys are wealth of experience and knowledge. I guess I’m not exactly sure where to start. I did find some 5900 CFM fans, which maybe I’ll start there. Keeping my Spal pusher fan.
Seems like those would be good for any changes down the road to radiator or other set up.

Next, if needed maybe I go with a two row, larger diameter tube radiator? My water pump seems to be functioning very well, just according to the flow in the radiator. I will be changing my thermostat to a flow cool or whatever that was. Looks like a great idea.

I’m open to name-calling, harassment and insults!
5900 fans

Pardon Our Interruption

 

[Fastereddie]

Dont buy those.
Your money would be better spent on a better water pump and thermostat. Hood vents are also great if you’re willing and like the look.

 

[Chris Ziemer]

I have a cowl hood, so there is some passive ventilation.
1. I’m not really sure what a better water pump is, except maybe a high flow.
2. Even though I have a new motor, I’m in smog country and the Blazer is pretty much a dog. Even with the new 290 horse motor. So I wasn’t hating getting rid of the fan for that reason.

Definitely getting a new thermostat. Drove it today in 100° weather and it definitely creeped over 210 with the AC on. Turned the AC off and it cooled down. Hard to believe the AC causes so much drag! Unbelievable. New compressor lines new condenser…

 

[tarussell]

It’s not just the drag of the compressor working on or adding load to the engine but the condenser is basically a huge heater blow’n hot air directly on most of the surface area of your radiator fins.
A good system should handle it with ease though - think of all these turbo diesel intercoolers stacked up in front of these modern truck radiators.

The aftermarket cowl hood opening will allow some hot air to escape while stopped but not as much as the extractor vents would - but as pointed out up above it’s something that ya’ gotta like the look of.

Just a thought - is this motor running lean and correctly in time because these things can make things get unnecessarily warm if outta wack ?

 

[Chris Ziemer]

You know I’ve been meaning to do some kind of review on this carb cheater I got. Not sure if you guys have heard of those. From a guy out of Ohio. It’s basically a controlled vacuum leak. Anyway I know my air fuel mixture is generally around 14 or 15, so a little lean. Timing is set at 6-8 before.

Unless I’m in the mountains, the carb cheater doesn’t really do anything because it does run lean already.

It gets warm going down the freeway at 60-65 (456 gears) pulling its own weight and it gets hot when you’re sitting in traffic too on hot days.

Do we not think that replacing the clutch fan however good it may or may not be with massive electric fans is not a good idea?

 

[tarussell]

If your S/D fan clutch is engaging properly at highway speeds then that’s about as much air as you can get pulling through the radiator by far !

At idle type speeds a really strong dual electric fan setup running all out will most likely move more air.

The absolute first thing to do though is get your carb situation acting right and then follow up on the other cooling issues ( if there are any after that’s addressed ? ).

 

[Chris Ziemer]

I know the air fuel mixture can be manipulated by exhaust leaks (O2 sensor) and vacuum leaks. I don’t know of any though. It doesn’t seem to run lean otherwise, except for being really underpowered.
For instance, getting on the freeway is a real exercise in timing.
Is that a sign? Otherwise man, it runs like a top. I went through about three Quadrajests and feel like I got a good one.
No audible pinging, ever.

 

[tarussell]

If I read things correctly you said this truck has 4.56 gears ?
What tire size ?

Even a stock crate 290HP motor with decent gearing should have absolutely no trouble getting up and going to merge onto a freeway.

This really gives question to possible retarded timing issues - might be worth a few bucks to let a legit shop verify correct timing and search for ALL potential vacuum leaks.
It’s possible that you may not have any liquid or airflow induced cooling system issues but rather tune related problems.

 

[Blue85]

How have I never heard of this before? Also makes you wonder if GM tried this and then decided CCC was a better idea? https://thecarbcheater.com/ I assume you set the base tune a little rich (or buy a Holley ) and let this vacuum leak it to stoich. Getting idle speed right could be tricky.