What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Update on my junk!! (Truggy it)

Well all of the tube work is done minus 2 bars that wont take but 30 min. Been working forever on the dash area. Its done for the exception of the tabs to hold my lexan panels and make a frame to hold my guage/switch panel I made. The I can finally tear it all down and paint:D
100_1730.sized.jpg

100_1731.sized.jpg

100_1732.sized.jpg

100_1733.sized.jpg

The panels will be removable to get at the wiring and such so heres what it looks like with them off.
100_1739.sized.jpg
 
Guess I never posted my rad mounts or the tube work so here it is.
Lower mounts.
100_1717.sized.jpg

Upper mounts.
100_1721.sized.jpg

Little bit of tube.
100_1726.sized.jpg

Ill post back up after paint:pimp:
 
Care to post some shots looking forward from the inside? Like out over the hood and also the footwell/dash area pretty please?
 
mikey_d05 said:
Care to post some shots looking forward from the inside? Like out over the hood and also the footwell/dash area pretty please?
Click to expand...
Sure, let me finish eating and ill go snap a few.
 
could I get a pic showing your sliders from below? Doing the rectangle-tube upgrade to my rockers as we speak...

rigs looks very very nice. Has me wanting to chop the rest of mine down... but nah... I'll keep at least some K5 skin. :thumb:

j
 
jekbrown said:
could I get a pic showing your sliders from below? Doing the rectangle-tube upgrade to my rockers as we speak...

rigs looks very very nice. Has me wanting to chop the rest of mine down... but nah... I'll keep at least some K5 skin. :thumb:

j
Click to expand...
Not much to show, right now there just welded to the floor and the body supports are notched to fit the tube. I still need to run some 2"x2"x1/4" square to the frame. But after I do that I will get a pic for ya. Unless you just want to see now:D
 
I'm interested to see some photos in bright daylight.....some long shots of the whole thing, especially side-profile shots.

I'm interested to see approach/departure angles and bellypan clearance, etc.


It's looking really good. I always get excited looking at big-time fab projects. :usaflag:
 
85mudblazin said:
Not much to show, right now there just welded to the floor and the body supports are notched to fit the tube. I still need to run some 2"x2"x1/4" square to the frame. But after I do that I will get a pic for ya. Unless you just want to see now:D
Click to expand...

how about pics of both before and after? :grin: :thumb:

j
 
Greg72 said:
I'm interested to see some photos in bright daylight.....some long shots of the whole thing, especially side-profile shots.

I'm interested to see approach/departure angles and bellypan clearance, etc.


It's looking really good. I always get excited looking at big-time fab projects. :usaflag:
Click to expand...
I would to:D Its been in the garage for a few months so I am really excited to get it outdoors to see it better. The goal for this weekend is to get it painted, its supposed to rain tomorrow some hopefully Sunday.
A&D angles are good. Belly clearance sucks since its just a 208 about 1/4" above stock with a 1/2" plate for the skid:D
 
You must log in or register to reply here.

Latest Posts

Top Bottom