Want an On Board Air System for $25??? :-)

[ntsqd]

Mtn. Burb, Try the Kragen on Gonzales near Ox blvd. They had two left as of last night.

 

[mr_blasto]

Thanks for posting up. I just bought one myself.

 

[grimjaw]

Does any one have the Advance Auto part number? The local stores are helpless with out a number to put in the 'puter. I have checked to two store close by and the web site does not list a part number. Thanks.

 

[clarkjw24]

I've checked all of my local stores and they're not availble in this area.

 

[smokkey1]

just checked my local parts stores and they don't have them

 

[k5 krawler 50]

Awesome post, after reading this it helped me decide what i was going to spend my 25 dollar b-day gift certificate on. I was lucky cuz the kregen(sp?) only had one left when i went and got it.
Cory

 

[jim burke]

I was very impressed with mine when I aired up a 35 inch BGF Mud with it this afternoon.

How long did it take to air up?

EDIT: I saw on the compressor test link ( http://www.gearinstalls.com/pepboys.htm ) it seems to take five minutes to inflate a 36x13.5 from 0 to about 16.5 psi.

 

[Bhintz]

Does any one have the Advance Auto part number?

again

 

[redneckdude]

might be MV50...thats the manufacturer number...it may or may not work

 

[81jimmyslt]

Thanks harryk5 for alerting us too the sale. Picked up the last one at Kragen still on sale, it was sitting in the back one of the employees wanted it.

I'm going to do some testing with my 39.5 tsl. The air time on two 36's is still impressive.

Jesse

 

[nemesis_pyros]

hmmm Looks like exaclty what I need.

Does anybody know of a place in Canada where i can get one of these for a reasonable price?

 

[mouse]

6 of them are at my local Checkers store - after I bought 2!

 

[stallion85]

Picked mine up this morning at Checker for $24.99

Looks to be of good quality for $25.

I plan on hard mounting it and running my ARB compressor along with it to speed up the process.

 

[stallion85]

Also, forgot to mention....thanks for the tip.


I just tested mine on my friends 35X14.5 MT 0-17psi in less than 4 minutes. You could watch the tire raise up as it was pumping, it was fast and was quite.

Awesome deal!!

 

[kotton]

thanks for the tip, went out and picked one up yesterday.

 

[HarryH3]

Dang! I wish I was gettin' a commission on these!

 

[redneckdude]

I just looked at these on ebay...75$ or more...anyone want to buy one for me and ill pay shipping?? lol

 

[dontoe]

I just looked at these on ebay...75$ or more...anyone want to buy one for me and ill pay shipping?? lol

I'll be glad to pay someone a bit for the trouble of shipping it to me also!

 

[mxfireman]

For the third time for those of you who have bought one could you post up the Part # on that is located on your reciept and which store? This would help those of us who can't find them try to order one. Thanks

 

[FWP]

Test results. Harry, you are DA MAN!!!

Cool find Harry, and yes everyone should send you a 5% commision

Anyway here's my test I ran tonight on 2 of these compressors.

42/15 TSL on 15x8 wheels- 4.5 psi to 14 psi in 5 minutes. Engine not running, battery at 11.7V while compressor running (near the end of the 5 min)

35/12.5/15 BFG on 15x10 wheels- 10 psi to 32 psi in 6-1/2 minutes. Engine not running, battery at 12.0V while compressor running (near the end of the 5 min)

For those guys looking for a part number- read the posts. Redneckdude already said it. MV-50