What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

What has 63" springs on it?? mine were stolen.

Re: Where or what....to find 63\" springs? mine were stolen

email me dude, you have me jumping between two different post. sign me onto your msn or yahoo messanger service.
 
Re: Where or what....to find 63\" springs? mine were stolen

mine are roughly 2.5" longer then stock. (gains a 1.25" lift) plus the ORD flip.
 
Re: Where or what....to find 63\" springs? mine were stolen

seventy,
you will want the springf rear to be roughly behind the hanger, that will aloow you to have plenty of drop. and remember that when you do a flip, you will always extend the driveline when you flex up or down,(meaning youll pull it away from the tranny, instead of a non flip which always compresses it into the tranny /forums/images/graemlins/wink.gif)
reason: the front hanger serves as a teeter point that is lower than the tranny yoke /forums/images/graemlins/wink.gif /forums/images/graemlins/wink.gif /forums/images/graemlins/wink.gif /forums/images/graemlins/deal.gif /forums/images/graemlins/deal.gif so make sure you aint livin on 1" of spline, i learned that the hard way /forums/images/graemlins/crazy.gif it fell out flexin /forums/images/graemlins/grin.gif
 
Re: Where or what....to find 63\" springs? mine were stolen

/forums/images/graemlins/confused.gif /forums/images/graemlins/confused.gif /forums/images/graemlins/confused.gif

I have my driveline extended and have between 3 and 4 inches in the SY. (I am planning on a SYE) So I will basically want the 63 inch spring to look like the 52 inch spring. So to do this I have to move my shackle mounts front and rear to give me a total of an additional 8 - 10 inchesbetween them right? Or am I totally lost? /forums/images/graemlins/confused.gif
 
Re: Where or what....to find 63\" springs? mine were stolen

thats correct.

if you aren't afraid to trim I'd push the axle back some. also if you are planning a SYE you'll need a new shaft anyways.
 
Re: Where or what....to find 63\" springs? mine were stolen

What is the stock spring length for the front?
 
Re: Where or what....to find 63\" springs? mine were stolen

[ QUOTE ]
whats SYE /forums/images/graemlins/whistling.gif

[/ QUOTE ]
Something not nessiary on your '77 K5 but benificial to your '88 Burb /forums/images/graemlins/whistling.gif
 
Re: Where or what....to find 63\" springs? mine were stolen

/forums/images/graemlins/angryfire.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif so what is it?
 
Re: Where or what....to find 63\" springs? mine were stolen

[ QUOTE ]
/forums/images/graemlins/angryfire.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif so what is it?

[/ QUOTE ]

Its replaces the doohicky with a thing or two. Works much better than stock...














































<font color="white">Slip Yoke Eliminator? /forums/images/graemlins/grin.gif</font>
 
Re: Where or what....to find 63\" springs? mine were stolen

Slip yok eliminator.
 
Re: Where or what....to find 63\" springs? mine were stolen

stock front springs are 49" long, 1st gens are 47"
 
Re: Where or what....to find 63\" springs? mine were stolen

[ QUOTE ]
stock front springs are 49" long, 1st gens are 47"

[/ QUOTE ]

Okay thanks /forums/images/graemlins/bow.gif /forums/images/graemlins/waytogo.gif
 
You must log in or register to reply here.

Latest Posts

Top Bottom