Ditch It!!! Less Wieght Anyway
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Who drives without their front swaybar? POST PICS
- Thread starter Ben B.
- Start date
TexasBlazerBoy
1/2 ton status
Probably the easiest and cheapest mod you can do.
funny how none of us mentioned what a bitch it is to take off 
If you have a wrenchin' buddy...invite him to the party , it's a lot easier with 2 peeps.I used my floorjack handle on the end of my ratchet for the big bolts.
If you have a wrenchin' buddy...invite him to the party , it's a lot easier with 2 peeps.I used my floorjack handle on the end of my ratchet for the big bolts.
81K5GUY
1/2 ton status
yeah those bolts are a bear.I put a socket on a pull handle with a long piece of pipe on the pull handle then jacked the end of the piece of pipe up with a floor jack.I daily drive mine and cant tell a difference .Getting ready to lift it 4" so we will see then how it acts.No flex pics but Im gonna pic whore anyway haha
cegusman
3/4 ton status
No sway bar for me
hidesertwheelin
1/2 ton status
Disturban said:funny how none of us mentioned what a bitch it is to take off
Air impact
TexasBlazerBoy
1/2 ton status
53chevy said:
Does your truck have a lift already? If so it might have been taken off.
The sway bar connects to the u-bolt plate with two bolts. Its held up by the frame area by two more bolts. The bolts on the u-bolt pad are bigger than an inch and hard as hell to get off.
Good luck
81K5GUY
1/2 ton status
hidesertwheelin said:Air impact
not here,tried that
A HOT WRENCH MAKES IT EASY
yall norther folks bolts probably rusted and fused together lol
Brians89K5
1/2 ton status
I ditched my sway bar and never looked back.
~Brian
~Brian
BizeeB65
1/2 ton status
you need to befriend someone with air tools... i removed my swaybar by myself (and my airimpact) and i think it took about 15 mins...
I have 6" of lift with skyjacker springs in the back, unknowns up front, and I rub the front tires even with trimming... Ditch the swaybar,and break out the sawzall.
I have 6" of lift with skyjacker springs in the back, unknowns up front, and I rub the front tires even with trimming... Ditch the swaybar,and break out the sawzall.
Zepplin
1/2 ton status
I haven't had mine on since I put on my front 10" springs. They are so stiff that I have no need for a sway bar.
Thunder
3/4 ton status
Heres a pic of my sway bar with lots of flex....................................
walla2k5
1/2 ton status
Thunder said:
Perfect.
Brians89K5
1/2 ton status
Thunder said:
