Got part of the body lift on. Unfortunately I have to go to work.
Martin
Martin
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
WL: Crusty 1985 K20.
- Thread starter 82355
- Start date
So did you just install one side, then drive it to work with some sort of Nebraska gangster lean???
I had to say something stupid since I like how top post batteries don't hide corrosion under the rubber cover......
I had to say something stupid since I like how top post batteries don't hide corrosion under the rubber cover......
Probably took one of the other in his fleet.
wetoolowdingbangow
1/2 ton status
And was he left-leaning or right-leaning?
He's not a moron so I'd say he leans to right a bit. Nothing good comes from those leftist commies.
This, we're talking about Martin he's got plenty of rigs to get to work with
Yup, but I thought I would come up with something entertaining to say, so that could subscribe to his thread.
No, I have only driven it about six feet.
Alas, even though the body mount bolts came out, only one will screw back in.
So now I have to cut out the floor pan to access the nuts.
Martin
Alas, even though the body mount bolts came out, only one will screw back in.
So now I have to cut out the floor pan to access the nuts.
Martin
Got the body lift done on the cab.
Now I need to take the box off.
Martin
Now I need to take the box off.
Martin
Pictures?
I want to see the difference in height.
Oh, and I bought a Dana 60 today.
Martin
Martin
Those are nice.
Not very good lighting, but I was in a hurry. I'll try for a better one tomorrow.
Oddly enough, my body mounts on this cab were in really good condition. Probably better than any other one I have ever taken apart. I probably would not have bought new ones if I had known how solid they were.
Here is a hole in my driver side floor pan.
Passenger side body mount and lift puck.
Martin
Last edited:
For parts or for crusty?
Crusty.
I am going to have to turn down some Dodge DRW hubs though.
Martin.
I am going to have to turn down some Dodge DRW hubs though.
Martin.
Sweet.
What are the wires going over the clutch pedal for?
Probably the transfer case gear selector light.
