Squirrel!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)
- Thread starter Babaganoosh
- Start date
5 hours until we head out guess I better get it together.
Anybody know what size bolt the np241 takes for the front drive shaft?
Anybody know what size bolt the np241 takes for the front drive shaft?
I know that they are a 5/8" head, or 16mm.
I don't know if they are 7/16" thread, or metric.
I don't know if they are 7/16" thread, or metric.
Fail!
I don't blame you... Was wanting to go out there and work on mine... Too f'n hot.
You mean you don't have these sizes memorized yet?
The front drive shaft has been out for months....
Poser ftw...Everytime the cross member gets me I can never remember which way it goes.
i know my 205 came from an 89 and its flange is 7/16 course thread. my 93 K1500 and 91 K2500 both have drivers drop 241's had 7/16 as well
Fluid going in, then fire in the hole
It runs but has some leaks, the drain plug I installed the o ring didn't fit real well so it leaks and for what ever reason I have oil leaking down the trans for some reason.
But hey it shifts and doesn't do anything dumb...
But hey it shifts and doesn't do anything dumb...
I don't see any pics of a burnout... 
Don't encourage thatI don't see any pics of a burnout...
This truck needs to get to Moab
Awesome news!
No shakes or shudders, this one is it. 
Better to find out when he's still close to town if there's any problems... He's built enough karma this time around that he should be good on that truck for a while.
Spreading dad's ashes august 29th towing the boat that's my main concern. I'll slam another trans in before moab if needed
I really hope you won't need to.
As much as we all admire Ben's persistence, I sure hope he never does this again.
And happy 9000th post, Ben.
