CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Don't see any wear in the tube or anything. The shock didn't leak at all, was only down I think 30-70 psi of pressure. I don't remember if I set it at 200 or where king says at 150.

You need to figure out where it came from. Unless Fox built them with the crap in it. Which I doubt, but it might have beer 30 on a Friday.
 
You need to figure out where it came from. Unless Fox built them with the crap in it. Which I doubt, but it might have beer 30 on a Friday.
Fox? hahah


I'll inspect it a little further when I have more time. I didn't see any crazy amounts of wear or pitting on anything. I did notice some amount on the wear band,assuming that's what caused it.
 
Last edited:
7th page back and she is still being neglected... work is freaking nuts, I haven't even looked at the truck in over a month.
 
Mostly looking at the shock hoop placement. No need to do any work for pics or anything, I appreciate it.
 
Mostly looking at the shock hoop placement. No need to do any work for pics or anything, I appreciate it.
Mine are not the ones ord supplied, they capture the top and side of the frame. They are welded then 3/16 plate against it to create a double welded joint. I can pull the cross brace off by hand and put it back in over the engine.
 
Top Bottom