Find a clutch fan.
Martin
Martin
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
'71 K5 Blazer CST "Mean Green"
- Thread starter Orange_roc
- Start date
Orange_roc
1/2 ton status
Orange_roc
1/2 ton status
Thanks. Going to try and lift as little as possible to prevent rub.
Orange_roc
1/2 ton status
Want big tire little lift. Not sure if it'll work. I do plan on taking it wheeling though.
Orange_roc
1/2 ton status
Close on the rear.
Orange_roc
1/2 ton status
Be nice to get away with zero rates front and rear.
I bet you really could, not sure if it would be worth it tho. Would be no room to flex and always be rubbing.
I as able to drive mine stock on 35s with a little hammer work, but wouldn't drive up a curb
Try a 1" body lift?
Martin
Martin
Orange_roc
1/2 ton status
I may just have to go with the 4". I still want to cause some trouble with it.
Orange_roc
1/2 ton status
Picked up a blast cabinet a few weeks back to clean some parts as I go. It works decent, though it's a little messy. Needs silicolened along the edges, due to a million screws holding it together. Blasted my intake and some little pieces today. Nothing real exciting, but some forward progress.
That's a sweet intake manifold!
Martin
Martin
Orange_roc
1/2 ton status
My oldest boy Trey helping me watch paint dry. Lol.
Orange_roc
1/2 ton status
Price was right!
Is the paint dry yet?
Martin
Martin
Orange_roc
1/2 ton status
Yes it is. Intake and exhaust manifolds are bolted back on. I actually finshied the paint and bling on my valve covers tonight at work. I just have to put them on and the plug wires. I'll start it up and if all is well, order a radiator for it. Then some fluid changes and brake work/ inspection. Not far from driving it I'd say.
Orange_roc
1/2 ton status
Cleaned up wires and valve covers with bling.
Those are pretty!
Martin
Martin
