TheBeast_88K5
Banned
Looks pimp too yo. I can't see anything that could break on there.
Don't tell him stuff like that...
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
'73 1ton K5- NorCal Budget Build. My first trail Break
- Thread starter NorCal_Chris
- Start date
- Status
Don't tell him stuff like that...
You guys
Got my crossover on
PAIN IN BUTT.
back from before....
PO had o ring on steering box line, so i couldnt use the flare box i got orig for crossover.... so i swapped guts and kept old box
So pressure line had a leak so i decided to replace it. Got an o ring line and went to stick it on. It had the freaking flare fitting at the pump!!!! ugggg i was pissed. So instead of doing it the right way, he had a custom line made. Glad i didnt find that out in the middle of nowere.
So i went to the junkyard and got an o ring nut thing for the back of the pump and got that all buttoned up.
Then the return line had a pinhole in it from when i moved it out of the way...... So i cut it right off the box and then ran a new soft line to pump. Blahh fluid all over driveway.
It juuuuuuussst squeezes in between the crossmember. Tested it to full bump. I will prob clearance the front of it, actually nevermind i will just make a new one.
Drives SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Nice now. No bumpsteer, turns great lock to lock.
I have never seen a set screw for the kingpin that long before. Is it tightened down? Mine only has about 1/2" sticking out, Yours looks like there is a lot sticking out. I could be wrong though.
Looks good!
Are you missing the zerk fitting on your draglink?
The set screw was loooooooooooooooooooong. like 3 inches lol. I was thinking of cutting it off, but then i have to put the snazzy taper on the bottom to fit in the washer, so i just said f it.
And yeah i didnt stick the zerk in that TRE yet.
TheBeast_88K5
Banned
I'll snap a bunch of pics tomoro, Chris....
We'll get some good shot's of the rig flexin' on 42's.
Ohhhh yeahhh..... Im gonna try and steal the video cam too. i want a comparison vid of the short line i did when on 36's
Lets hope the bumpstops work.... LOL
Lets hope the bumpstops work.... LOL
Went wheelin Truck performed flawlessly.... not a complaint. I just need a front locker and a doubler now.
Actually i want to get rid of this dumb edelbrock carb first.... stalled out a couple times, coulda went farther up that rock but truck died.
Truck performed flawlessly.... not a complaint. I just need a front locker and a doubler now.Actually i want to get rid of this dumb edelbrock carb first.... stalled out a couple times, coulda went farther up that rock but truck died.
Pics?
TheBeast_88K5
Banned
Went wheelin
Actually i want to get rid of this dumb edelbrock carb first.... stalled out a couple times, coulda went farther up that rock but truck died.
Feckin' eldelcrap....
Got some EPIC pic's!
Forget your carb., what about my driveshaft!?
Waiting!!!!!!!!!!
TheBeast_88K5
Banned
The 6th and 8th picture would be a great canidate for the CK5 calander!!!!
Sweet!!!!!
Sweet!!!!!
VIDS 
TheBeast_88K5
Banned
What's w/ the "image moved or deleted" - thing?
This is a sweet pic!!!
- Status
